Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 5 TROUBLESHOOTING
5-15
2) Loosen the fixing screw on the reversal
registration roller mounting plate, and
slide it to the left and the right to adjust
the mounting angle of the registration
roller.
3) At the end of adjustment, tighten the
fixing screw on the reversal registration
roller mounting plate.
4) Set the DIP switch (SW1) on the ADF
controller PCB back to its initial setting,
and mount the ADF controller cover.
Screw
Reversal registration roller
mounting plate
If A>0, slide the mounting plate to the left.
If B>0, slide the mounting plate to the right.
F05-101-29
1.1.4 Horizontal Registration Ad-
justment
Horizontal registration adjustment is
made for the following two:
[1] Pickup from the original tray
[2] Pick up from the manual feed tray
a. Pickup from the Original Tray
1) Remove the screw, and detach the ADF
controller cover.
F05-101-30
2) Set the DIP switch (SW1) on the ADF
controller PCB as indicated.
F05-101-31
ADF controller cover
Screw