Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 5 TROUBLESHOOTING
5-11
2) Loosen the fixing screw on the manual
feed registration roller mounting plate,
and slide it to the left and the right to
adjust the position of the registration
roller.
3) At the end of the adjustment, tighten the
fixing screw on the manual feed regis-
tration roller mounting plate.
4) Set the DIP switch (SW1) on the ADF
controller PCB back to its initial setting,
and mount the ADF controller cover.
If A>0, slide the mounting plate to the right.
If B>0, slide the mounting plate to the left.
F05-101-21
c. Reversal for Double-Sided Originals
1) Remove the screw, and detach the ADF
controller cover.
2) Set the DIP switch (SW1) on the ADF
controller PCB as indicated.
F05-101-22
F05-101-23
Screw
Manual feed registration roller
mounting plate
ADF controller cover
Screw