Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 5 TROUBLESHOOTING
5-4
1.1.3 Correcting the Skew
The skew must be removed for the fol-
lowing three:
[1] Pickup from the original tray
[2] Pickup from the manual feed tray
[3] Reversal for double-sided originals
a. Pickup from the Original Tray
1) Remove the screw, and detach the ADF
controller cover.
F05-101-07
2) Set the DIP switch (SW1) on the ADF
controller PCB as indicated.
F05-101-08
3) Place a single sheet of A4 or LTR copy
paper in the original tray.
F05-101-09
ADF controller cover
Screw
Copy paper