Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 5 TROUBLESHOOTING
5-1
1 Standards and Adjust-
ments
1.1 Basic Adjustments
The basic adjustments of the DADF con-
sist of the following, which must be per-
formed in sequence:
[1] ADF height adjustment
[2] ADF right angel adjustment
[3] Skew correction
[4] Horizontal adjustment
[5] Original stop position adjustment
1.1.1 ADF Height Adjustment
1) Remove the two screws, and detach the
lower front cover.
F05-101-01
2) Make adjustments by loosening the two
fixed screws [5] on the magnet catch so
that the left and right rubber feet are in
contact with the base when the DADF is
closed.
3) After the adjustment, tighten the fixing
screws on the magnet catch, and mount
the front cover.
F05-101-02
Lower front cover
Screw
Screw
[3] [4] [5][5]
[3][4] [5][5]
(left)
(right)