Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 4 MAINTENANCE AND INSPECTION
4-11
6) At the end of cleaning work, press the
push switch (SW2) once again.
• The separation assembly will stop.
4.3.11 Pull-Off Roller
1) Open the upper cover, and open the
feeding guide.
2) Remove the ADF controller cover, and
set the DIP switch (SW1) on the ADF
controller PCB as indicated.
3) Press the push switch (SW2) on the
ADF controller PCB.
• The separation assembly will start.
4) Clean it with lint-free paper moistened
with alcohol.
F04-401-14
F04-401-15
4.3.12 Registration Roller
1) Open the upper cover, and open the
feeding guide.
2) Remove the reversing guide.
3) Remove the ADF controller cover, and
set the DIP switch (SW1) on the ADF
controller PCB as indicated.
4) Press the push switch (SW2) on the
ADF controller PCB.
• The reversing assembly will start.
5) Clean it with lint-free paper moistened
with alcohol.
F04-401-16
F04-401-17