Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 4 MAINTENANCE AND INSPECTION
4-10
4.3.10 Separation Belt/Feeding
Roller
1) Obtain a single sheet of A4 or LTR copy
paper.
2) Remove the ADF controller cover, and
set the DIP switch (SW1) on the ADF
controller PCB as indicated.
3) Press the push switch (SW2) on the
ADF controller PCB.
• The separation assembly will start.
4) Moisten t the copy paper obtained in
step 1) with alcohol.
5) Keep the copy paper against the pickup
slot to clean.
The pull-off roller is also driven.
Hold the copy paper so that it
will not be drawn to the pull-off
roller: in the case of A4, as
shown in F04-401-13a; in the
case of LTR, as shown in F04-
401-13b.
F04-401-12
F04-401-13a
Slide guide
Rail
Against the edge of
the paper.
Rail
Against
the edge of the paper.
Slide guide
F04-401-13b