Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 3 MECHANICAL SYSTEMS
3-28
3.1.8 Removing the Reversing
Roller
1) Remove the reversal motor unit. (F03-
201-01)
2) Remove the two screws [1] of the
pickup front side plate, and disconnect
the connector [2]; then, detach the pre-
reversal solenoid unit [3].
F03-301-39
3) Remove the two screws [4], and detach
the reversing guide [5].
When mounting the reversing
guide, do so while forcing it in
the direction of the arrow. If not
properly mounted, it can trigger
jams.
F03-301-40
4) Remove the E-ring [8], gear [8], and
parallel pin [9] on the rear side plate
side of the reversing roller [6] (2 pc.).
The gear holds a pin. Take care
not to lose it when removing the
gear.
F03-301-41
[2]
[1](M3 x 4)
[1](M3 x 6)
[3]
[4]
[4]
[5]
Only when mounting it.
[7]
[7]
[8]
[8]
[9]
[6]
[6]