Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 3 MECHANICAL SYSTEMS
3-23
5) Remove the E-ring [15], gear [16], par-
allel pin [17], E-ring [18], and bearing
[19] of the feeding (pull-off) roller [9]
(rear side plate); then, remove the feed-
ing (pull-off) roller [9].
The gear holds a pin. Take care
not to drop it.
F03-301-27
3.1.6 Removing the Registration
Roller
1) Remove the two screws [1], and detach
the reversing guide [2].
When mounting the reversing
guide, do so while forcing it in
the direction of the arrow. If not
mounted properly, it can trigger
jams.
2) Remove the two screws [3], and detach
the registration sensor PCB [4].
F03-301-28
2) Remove the two screws [3], and detach
the registration sensor PCB [4].
F03-301-29
[19]
[18]
[17]
[9] [15]
[16]
[1]
[1]
[2]
Only when mounting it.
[3]
[3]
[4]