Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 3 MECHANICAL SYSTEMS
3-20
12) Remove the separation roller.
When mounting the one-way
gear, be sure that the protrusion
faces inside.
F03-301-18
3.1.4 Removing the Manual Feed
Registration Roller
1) Remove the body front cover. (F03-101-
04b,c)
2) Remove the main cover. (F03-101-05)
3) Remove the three screws [1], and dis-
connect the connector [2]; then, remove
the solenoid unit [3] from the delivery
assembly front side plate.
F03-301-19
4) Remove the two screws [4], and detach
the manual feed registration sensor PCB
assembly [5].
F03-301-20
One-way gear
Protrusion
[1]
[2]
[3]
[1]
[4]
[5]