Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 3 MECHANICAL SYSTEMS
3-7
2 Drive System
2.1.1 Removing the Reversal Motor
Unit
1) Disconnect the connector J602 [2] from
the reversal motor driver PCB [1].
2) Remove the screw [3], and detach the
pre-reversal sensor base [4].
F03-201-01
3) Remove the screw [5], and detach the
cover [6]; then, remove the two screws
[7], and detach the reversal motor unit
[8].
F03-201-02
2.1.2 Removing the Separation Mo-
tor Unit
1) Remove the screw [1], and detach the
separation motor sensor support plate
[2].
F03-201-03
[1]
[2]
[4]
[3]
[5]
[8]
[7]
[7]
[6]
[2]
[1]