Specifications

COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-J1 REV.0 MAR.2001
CHAPTER 2 OPERATIONS AND TIMING
2-80
S3
PI10
PI3
PI6
PI5
S7
PI1
S2
S3
SW301
PI1
PI1
PI2
PI11
In stream reading (LDR), the post-registra-
tion roller paper sensor remains on although
an original is assumed to have been moved
30 mm from wait position.
The DADF is opened while in operation.
The left cover is opened while in operation.
The voltage from the copier fluctuates while
in operation.
In stream reading, the copier does not
change the reading potion when the DADF
has picked up a large-size original in opposi-
tion to instructions for small-size originals.
When switching the state of the belt motor,
the belt motor is not in acceleration, constant
speed, or deceleration state.
In stream reading, the image leading edge
signal is generated between wait position
and image leading edge position.
The belt movement for the last sheet fails.
Jams related to the motor drive mechanism
have occurred twice or less.
Original size fault
User ADF open
User left cover
open
Power down
Stream reading
image leading
edge position fault
Belt status
Image leading
edge output tim-
ing fault
Last sheet fault
Error
00E6
00E7
00E8
00E9
00EA
00EB
00F3
00F4
00FD
00FE
J-E6
J-E7
J-E8
J-E9
J-EA
J-EB
(1st original)
J-F3
J-F4
J-FD
J-FE
T02-301-06
Jam code
DADF Copier
Jam type
Related
sensor
Conditions of detection