Specifications
COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
2-73
CHAPTER 2 OPERATION AND TIMING
F. Direct Transmission
Press on
Stop key
Original
pulled out
Returns to standby
Returns to standby
If an original exists at the end of a pre-
selected operation, a message will appear to
that effect on the LCD; thereafter, the mode
returns to default and then to standby after a
time-out.
Returns to standby immediately.
Description
Ring time
Suspension
None
Before pre-selected
operation
After pre-selected
operation
Before pre-selected
operation
After pre-selected
operation
Single
1. end of pre-selected operation
Refers to a state that occurs when an original has been set after a transmission mode or a
destination has been selected.
2. destination
Refers to a press on the one-touch or speed dial or a press on the Start key after a press on the
keypad.
3. after pre-selected operation
Refers to the state that occurs between the end of a pre-selected operation and the end of the
transmission task initiated by the operation or to a redial wait period.
4. Direct transmission is given priority over memory transmission.
5. In the following cases, memory transmission reservation mode will be selected over direct
transmission.
a. Multiple destinations are specified.
b. A specific time is specified using the Timer key.