Specifications

COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
2-21
CHAPTER 2 OPERATION AND TIMING
2. Selecting Recording Sheets
a. Outline
When the default service data is effective, recording sheets are selected based on the cassette
selection switch settings (A through D) in reference to the following descriptions:
Priority
1
2
3
4
Description
Sheet whose main scanning length is the
same as the print size length and which
can accommodate all the image.
Sheet whose main scanning length is not
the same as the print size length but can
accommodate all the image.
Sheet whose main scanning length is the
same as the print size length and which
allows a minimum number of divisions.
Sheet whose main scanning length is not
the same as the print size length but
which allows a minimum number of
divisions.
Remarks
If it takes multiple sheets to print all the
image, a sheet whose sub scanning
length is closest to the print size length
(minimum size) will be selected.
If it takes multiple sheets to print all the
image and if different sheets allow a
minimum number of divisions, the sheet
with the shortest sub scanning length
will be selected. The second and
subsequent pages will be printed on the
same type of sheet.
Reference:
If sheets of the same size are set, the order of priority will be as follows:
[3]
[5]
[1]
[2]
[3]
[4]
[7]
[1]
[2]
[3]
[4]
[5]
[6]
[1]
[2]
Figure 2-302 (DADF-A1 Model)
If the selected sheets run out during printing, the sheets with the second priority will
automatically be selected.
If no sheet exists for printing, memory reception will be used.