Specifications

COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
2-17
CHAPTER 2 OPERATION AND TIMING
1.1 Cassette Switch A, B, C, D
For details, see 2. "Selecting Recording Paper" on p. 2-24.
1.2 Receiving Side Automatic/Fixed Reduction for Recording
a. Receiving Side Automatic Reduction for Recording
If the page of received data is longer than the default page, the image will be reduced (within the
specified maximum reduction ratio) for recording so that the page will not be divided.
b. Receiving Side Default Reduction for Recording
All received pages are always reduced for recording.
ADDITIONAL FUNCTIONS > CUSTOM FAX SETTINGS > PRINTER SETTINGS > RX REDUCTION
1.3 Reception Footer Function
The reception footer function adds the date and time of reception, and sequential and page
numbers to the trailing edge of each recording sheet. This function is used for received images
only, and does not apply to test shot mode or stored images. The size of the footer varies
according to the selected resolution: it is about 4 mm at standard resolution, and about 3 mm in
other resolutions.
The reception footer is added to the trailing edge (within the effective recording area) of each
recording sheet regardless of the length of the reception page. When a footer is added, the
reception page recording will be smaller than otherwise.
Figure 2-301
ADDITIONAL FUNCTIONS > CUSTOM FAX SETTINGS >
RX SETTINGS > RX PAGE FOOTER
Received page
Recording area
Reception footer