Specifications

1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

2-7

CHAPTER 2 OPERATION AND TIMING

B. Reading Operation

1. Reading for Memory Transmission

Each original placed on the copyboard glass is read and stored in memory. A number of originals

may be transmitted in a single communication. When the feeder is used, originals stacked in the

feeder are read one after another in sequence.

The originals read in copyboard mode and those read using the feeder cannot be combined.

2. Reading for Direct Transmission

A single original placed on the copyboard glass is read in response to a press on the Start key. If

the feeder is used, all originals stacked in the feeder will be read.

As in the case of reading for memory transmission, originals read in copyboard mode and those

read using the feeder cannot be combined.

3. Reading Originals of Non-Specified Sizes

Originals are read in respect of the size (A/B-, INCH-configuration) set in service mode

(COPIER > OPTION > BODY > MODEL-SZ). If the original in question is of a size different from

the specified size, part of its image may not be read or its center may be displaced.