Specifications
COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-25
CHAPTER 5 ERROR CODE
##793 (reception) time-over by failure to detect effective frame during reception of high-speed
signals
Cause Remedy
• The condition of the line is poor, and the other
device cannot receive signals properly.
• The condition of the line is poor, and signals
cannot be received properly.
• The communications coding was busy.
1. Raise the transmission level of the modem using
parameter 07 of #2 MENU so that the other
device may receive signals properly.
2. Adjust the NL equalizer using parameter 05 of
#2 MENU so that the other device may receive
signals properly.
1. Request the other party to lower the start speed
of the other device.
2. Request the other party to raise the transmission
level of the other device to ensure correct recep-
tion of signals.
1. Turn off and then on the power.
2. Replace the fax PCB.
##795 (transmission/reception) error in decoding for communication
Cause Remedy
• The communications coding was busy. 1. Turn off and then on the power.
2. Replace the fax PCB.
##799 (transmission) system error
Cause Remedy
• EOR was about to be transmitted in an abbre-
viated procedures.
1. Turn off and then on the power.
2. Replace the fax PCB.