Specifications

CHAPTER 5 ERROR CODE
5-24
COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
##788 (transmission) excess procedure signal re-transmission or T5 time-over (60 sec) after
transmission of EOR-EOP
Cause Remedy
• The page buffer of the other device is full or is
in use and, although RNR has been received
after transmission of EOR-EOP, an acknowledge
signal cannot be received after transmission of
RR.
1. Turn the setting of 'CUSTOM FAX SETTINGS >
TX SETTINGS > ECM TX' to 'OFF'.
2. Lower the setting of 'CUSTOM FAX SETTINGS >
SYSTEM SETTINGS > TX START SPEED'.
##789 (transmission) ERR received after transmission of EOR-EOP
Cause Remedy
• The condition of the line is poor, and the other
device cannot receive image signals often.
• The other device malfunctioned because of an
echo.
1. Raise the transmission level of the modem using
parameter 07 of #2 MENU so that the other
device may receive image signals properly.
2. Adjust the NL equalizer using parameter 05 of
#2 MENU so that the other device may receive
image signals properly.
1. Provide measures against echoes by referring to
the descriptions under #1 SSSW SW03.
2. Attach a longer pause at the end of the telephone
number when registering under auto dial to pre-
vent responding to the first DIS from the other
device.
3. Press the Start key after hearing the first DIS
from the other device in manual ringing.
4. Request the other party to lower the transmission
level of the other device so that the other device
will not receive echoes.
##790 (reception) ERR transmitted after reception of EOR-Q
Cause Remedy
• The condition of the line is poor, and the other
device often cannot receive image signals pro-
perly.
• The other device malfunctioned because of an
echo.
1. Request the other party to raise the transmission
level of the modem of the other device so as to
ensure correct reception of image signals.
2. Adjust the NL equalizer using parameter 05 of
#2 MENU to ensure correct reception of image
signals.
• Provide measures against echoes by referring to
the descriptions under #1 SSSW SW03.