Specifications

COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-21
CHAPTER 5 ERROR CODE
##769 (transmission) excess procedure signal re-transmission after transmission of PPS-EOP
Cause Remedy
• The condition of the line is poor and, although
CTC has been transmitted after receiving PPR
four items after transmission of PPS-EOP, the
other device cannot receive the signal.
• The condition of the line is poor and, although
PPR has been received four times after transmis-
sion of PPS-EOP, an acknowledge signal cannot
be received properly after transmission of CTC.
• Raise the transmission level of the modem using
parameter 07 of #2 MENU so that the other
device may receive CTC properly.
• Request the other party to raise the transmission
level of the other device.
##770 (transmission) excess procedure signal re-transmission after transmission of EOR-
NULL (acknowledge signal not received)
Cause Remedy
• The condition of the line is poor, and the other
device cannot receive EOR-NULL properly.
• The condition of the line is poor, and signals
cannot be received properly.
• Raise the transmission level of the modem using
parameter 07 of #2 MENU so that the other party
may receive EOR-NULL.
• Request the other party to raise the transmission
level of the other device to ensure correct recep-
tion of signals.
##772 (transmission) DCN received after transmission of EOR-NULL
Cause Remedy
• The condition of the line is poor, and the other
device cannot receive EOR-NULL properly.
• The condition of the line is poor, and signals
cannot be received properly.
• Raise the transmission level of the modem using
parameter 07 of #2 MENU so that the other
device may receive EOR-NULL properly.