Specifications
COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-13
CHAPTER 5 ERROR CODE
##285 (transmission) DCN received after transmission of EOP during transmission
Cause Remedy
• The Stop key was pressed during communica-
tion.
• Try re-transmission.
##286 (transmission) DCN received after transmission of EOM during transmission
Cause Remedy
• The Stop key was pressed during communica-
tion.
• Try re-transmission.
##287 (transmission) DCN received after transmission of MPS during transmission
Cause Remedy
• The Stop key was pressed during communica-
tion.
• Try re-transmission.
##288 (transmission) non-PIN, -PIP, -MCF, -RTP, -RTN signal received after transmission of
EOP during transmission
Cause Remedy
• An error occurred in the procedure signal. • Make a recording of the communication proce-
dure sound on DAT, and have it analyzed.
##289 (transmission) non-PIN, -PIP, -MCF, -RTP, -RTN signal received after transmission of
EOM during transmission
Cause Remedy
• An error occurred in the procedure signal. • Make a recording of the communication proce-
dure sound on DAT, and have it analyzed.