Specifications

COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-3
CHAPTER 5 ERROR CODE
#011 (reception) polling reception error
Cause Action
• No original exists in the other device.
• The original is not set properly at time of trans-
mission, initiating polling reception.
• Request the other party to set the original
properly.
• Set the original properly for transmission.
#012 (transmission) no recording paper in the other device
Cause Action
• No recording paper exists in the other device. • Request the other party to set recording paper.
#018 (transmission/reception) auto ring error
Cause Action
• The tone/pulse settings are wrong.
• The time length of line connection is too long.
• The other device was busy, causing a time-over.
• The other device is not connected or is turned
off, causing a time-over.
• No recording paper exists in the other device,
causing a time-over.
• The No. 2 ring does not arrive for transmission
to F Net.
• Set the tone/pulse settings correctly.
1. Put a longer pause when setting auto dial,
thereby delaying the start of the timer.
2. Put a delay to the T1 timer using 10 of #3
NUMERIC Param., thereby preventing a time-
over.
• Try ringing again.
• Contact the other party to find out the cause.
• Request the other party to set recording paper.
• Find out if subscription to F Net has been
made, and report a line fault to the telephone
company.