Specifications

COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
5-1
CHAPTER 5 ERROR CODE
I. USER ERROR CODE
#001 (transmission) original jam
Cause Action
• An original is trapped.
• The size/thickness of the original is out of
spec.
• A fault exists in the internal mechanism.
• Remove the original, and start over.
1. Make a copy in book mode, and send; or,
send in book mode.
2. If the original is thin, send in book mode.
See the descriptions under "Detecting Original
Jams" in the RDF-G1 Service Manual.
#003 (transmission/reception) 1 page copying, transmission/reception time-over
Cause Action
• A single page is 1 m or more or copying/trans-
mission takes more than a specific time length
(32 min).
• Reception takes more than a specific time
length (32 min).
• A fault exists in the internal mechanism.
1. Make a copy in book mode, and copy/send by
dividing the original.
2. Using bit 0 and bit 1 of SW12 in #1 SSSW,
increase the setting of the page timer.
1. Request the other party to send the original by
dividing it.
2. Contact the other party to find out the causes.
3. Using bit 0 and bit 1 of SW12 in #1 SSSW,
increase the setting of the page timer.
See the descriptions under "Detecting Original
Jams" in the RDF-G1 Service Manual.