Specifications
1-13
COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
C. Common Settings
The following are items that relate to fax functions from those which are used in common by copier and fax systems.
Level 1 Level 2 Factory default
CUSTOM COMMON SETTINGS
TIMER SETTINGS
INITIAL FUNCTION
SYSTEM DIFF SIZE ORIGINAL
DRAWER ELIGIBILITY FOR APS/ADS
STACK BYPASS
1st
2nd
TRAY
multi output tray 3
A
B
C
PRINTING PRIORITY
COPY
FAX
PRINTER
SET SYSTEM SETTING PASSWORD
RESTRICT USE OF FAX WITH CONTROL CARD
DEPT. ID MANAGEMENT
STORE DEPT. ID/PASSWORD
COPY TOTALS
DATE & TIME SETTINGS
AUTO SLEEP TIME
copier
ON
OFF
ON
ON
copier
fax/printer
-
1
2
3
none
no
no
none
User's Manual
none
5 min
To select the basic screen at power-on (copier or fax).
To enable/disable placement of originals of different lengths in sub scanning direction on RDF
(other than copier function).
To enable/disable use of each cassette for cassette auto selection for copier, fax, and printer functions.
To assign the special tray of a sorter (accessory) to a function (copier, fax, or printer).
To set an ID for the system controller (4 digit max.).
To specify whether to limit the number of persons given access to the fax using a control card (accessory).
To specify whether to limit the number of persons given access to the copier or fax or to control the number
of sheets used.
To store group ID and ID numbers for group-by-group control.
To enable counting the sheets used and printing of lists (w/ fax function only) according to group.
To set the current date and time.
To set the time to auto-sleep
(1 min to 8 hr; printing is enabled in response to an incoming file even in sleep state).
Uses