Specifications

COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
4-41
CHAPTER 4 SERVICE MODE
b. Frequency Test (FREQ)
Press ‘FREQ’ on the MODEM NCU Menu screen to start frequency test mode and bring up the
following screen:
Select and press an item from among the list of items indicated so that the tone generation
function of the modem will be used to generate a tone at the selected frequency after closing the direct
current circuit. You can also monitor the transmission signals coming out of the speaker.
To stop the operation, press the key.
c. G3 Signal Transmission Test (G3 Tx)
Press ‘G3 Tx’ on the MODEM NCU Menu screen to start G3 transmission test and to bring up
the following screen:
Select and press an item from the list of items indicated so that the G3 signal transmission
function of the modem will be used to generate a tone at the selected frequency after closing the direct
current circuit. You can also monitor the transmission signals coming out of the speaker.
To stop the operation, press the key.
<1/1>
<READY>
Report
Sssw Menu Num Ncu
Type
Genesis
Print Clear Test
<MODEM NCU>
<FREQ>
RBT
462Hz
1100Hz
1300Hz
1500Hz
1650Hz
1850Hz
2100Hz
<1/1>
<READY>
<MODEM NCU>
<G3 Tx>
300bps
2400bps
4800bps
7200bps
9600bps
TC7200bps
TC9600bps
12000bps
14400bps
300bps(ALL0)
300bps(ALL1)
300bps(1:1)
300bps(1:4)
300bps(4:1)
Report
Sssw Menu Num Ncu
Type
Genesis
Print Clear Test