Specifications

COPYRIGHT © 1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
4-35
CHAPTER 4 SERVICE MODE
11. Initializing the Settings (#8 CLEAR)
Each data item may be initialized independently of others as follows. The default setting
(effective at time of shipment) will take the place of each setting and parameter.
12. Displaying ROM Information (#9 ROM)
This item serves the same function as the function under DISPLAY 04 in the copier's service
mode (*1*).
To check the ROM version, be sure to execute DISPLAY 04 in the copier's service mode.
(The program used to control the fax functions is the ROM DIMM mounted on the copier's
image processor PCB.)
TEL
USSW SW
NCU
SERVICE DATA
SERVICE SW
REPORT
ALL
COUNTER
Item Data item
Contents registered under TEL registration:
one-touch dial, speed dial, group dial.
Contents of memory control (user data)
Contents registered under user data and SSSW#1 through #3
The contents of memory control (user data) will not be cleared.
The image data stored in memory will be cleared.
Contents of SSSW#4
Contents of system dump list
User data and contents of SSSW#1 through #3, #6, #7
Contents of communications control report
All settings/registered data items
Reading page count/communication control numbers