Specifications

CHAPTER 4 SERVICE MODE

4-26

1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

ATT: Use it to set the transmission level (ATT).

If an error tends to occur often because of line condition, increase the transmission level.

Memo

The following is a list of error codes that may occur because of line condition:

##100, ##101, ##102, ##104, ##201, ##280, ##281, ##282, ##283, ##284, ##750, ##752,

##754, ##755, ##757, ##759, ##760, ##762, ##764, ##765, ##767, ##769, ##770, ##772,

##774, ##775, ##777, ##779, ##780, ##782, ##784, ##785, ##787, ##789

The following is a list of error codes that may occur because of line condition.

##103, ##106, ##107, ##201, ##793

V.34 BAUD: Use it to set the upper limit for the modulation speed (baud rate) for the V.34

primary channel.

V.34 SPEED: Use it to set the upper limit for the data transmission speed for the V.34

primary channel between 2.4 k and 33.6 kbps in 2400-bps increments.

PCI FREQUENCY: Use it to set the frequency for the pseudo CI signal.

With some external telephones, a ring may not be sounded when the FAX/

TEL switch function is triggered. If the sound is not heard, be sure to change

the frequency of the pseudo CI signal.