Specifications

COPYRIGHT © 1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
4-25
CHAPTER 4 SERVICE MODE
5. Menu Switch Settings (#2 MENU)
NL EQ Use it to turn on or off the NL EQNL equalizer.
If an error tends to occur often because of line condition, be sure to turn it on.
Memo
The following is a list of errors that may occur because of line condition at time of transmission.
##100, ##101, ##102, ##104, ##201, ##281, ##282, ##283, ##750, ##755, ##765, ##774,
##779, ##784, ##789
The following is a list of error codes that may occur because of line condition at time of
reception:
##103, ##107, ##114, ##201, ##790, ##793
MONITOR: Use it to set the telephone line monitor function.
DIAL: Use it to turn on the telephone line circuit monitor sound from the speaker
between start of transmission and DIS.
SERVICEMAN: Use it to turn on the monitor sound of the telephone line from the speaker
between start and end of communication.
OFF: Use it to turn off the monitor sound of the telephone line from the speaker.
OK
<1/1>
<READY>
Report
Sssw Menu Num Ncu
Type
Genesis
Print Clear Test
NL EQ
MONITOR
ATT(P)
V34 BAUD
V34 SPEED
PCI EREQUENCY
DATE
OFF
DIAL
10
3429baud
3360bps
25Hz
MM/DD YY
NL EQ
MONITOR
ATT (P)
V34 BAUD
V34 SPEED
PCI FREQUENCY
DATE
NL equalizer
Telephone line monitor
Transmission level (ATT)
V.34 modulation speed upper limit
V.34 data speed upper limit
Pseudo CI signal frequency
Date format
ON/OFF
DIAL/SERVICEMAN/OFF
0 to 15
2400 to 3429
2400 to 33600
50Hz/25Hz/17Hz
‘YY MM/DD,MM DD/YY,
DD/MM ’YY
Function Settings