Specifications

CHAPTER 4 SERVICE MODE
4-22
COPYRIGHT © 1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
#1 SSSW-SW25: report display function settings
Bit 0
Use it to specify which telephone number should be indicated on the report after transmission.
Caller: Indicates the telephone number of the caller.
Callee: Indicates the telephone number (CSI signal data) from the other device.
Memo
If a ring is made not using the one-touch dial or speed dial function, the telephone number (CSI
signal data) from the other device will be indicated on the report even if "caller" has been
selected.
Bit 1
Use it to specify which abbreviation should be indicated on the report after transmission.
Registered: Indicates the abbreviation of the other device registered under one-touch dial or
speed dial directories.
Other device: Indicates the abbreviation (SF signal data) from the other party.
Memo
If no appropriate abbreviation has been registered under the one-touch dial number or the speed
dial number used for ringing, the abbreviation (NSF signal data) from the other device will be
indicated even if "registered device" has been selected.
25
0
1
3
4
0
0
0
0
Transmission telephone number indicated
on report
Callee abbreviation indicated on report
Do not change
Do not change
1
Callee
0
Callee
Yes No
Yes No
2 0Do not change
5 0Continuous polling reception
6 0Do not change
7 0Do not change
SW
No.
Bit
No.
Description
Bit setting
Default