Specifications

CHAPTER 4 SERVICE MODE

4-10

1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

Bit 4, 5, 6

Use it to select transmission mode: international (1), international (2), or international (3).

Select an appropriate mode using dial registration or service soft switch if an error tends to occur

often when transmitting data to an overseas destination.

Memo

The following is a list of error codes that may occur at time of transmission because of an echo.

#005, #100, #101, #102, #104, #201, #280, #281, #283, #284, #750, #760, #765, #774, #779,

#784, #794

dial registration settings (user level)

Select "international transmission (1)" when using transmission mode registration for one-touch dial

or speed dial. If an echo still occurs, select "international transmission (2)," and "international

transmission (3)" in the order indicated. The transmission mode selected under one-touch dial/speed

dial registration will be given priority over the settings made by the service soft switch.

When a transmission mode is selected using this switch, an international transmission mode may be

selected also for transmission using the keypad. For settings, see the following table.

international transmission (1): Ignores the first DIS signal sent by the other device.

international transmission (2): Transmits a 1850-Hz tonal signal when transmitting the DIS signal.

international transmission (3): Transmits a 1650-Hz tonal signal when transmitting the DIS signal.

international transmission (1)

international transmission (2)

international transmission (3)

Bit

Transmission mode