Specifications

1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

4-1

CHAPTER 4 SERVICE MODE

I. SERVICE MODE

A. Service Data

1. Outline

Service data consists of the following nine items (#1 through #9). In addition, test mode (#10

TEST) may be used.

# SSSW: service soft switch

Use it to register/set basic fax functions (e.g., error control, echo prevention, communication

problem prevention).

#2 MENU: menu switch settings

Use it to register/set functions needed at time of installation (e.g., NL equalizer, output level).

#3 NUMERIC Param: numeric parameter settings

Use it to enter numeric parameters.

#4 NCU: (subject to limitation)

Use it to set various items as a group to reflect #5 TYPE settings.

#5 TYPE: site settings

Use it to set the type so that the service data will be set to comply with the communication

standards of the country of installation.

#6 GENESIS (subject to limitation)

Do not change the original settings, or the reading image quality may be lost.

#7 PRINTER: printer functions settings

Use it to register/set basic printer functions (for servicing work; e.g., conditions for reducing

received images).

#8 CLEAR: data initialization mode settings

Use it to initialize each data item to its default setting.

#9 ROM: ROM control

Is disabled. (The settings may be checked under DISPLAY in copier service mode *1*).

Use it to execute various tests. (For details, see I.B "Test Mode.")

#10TEST

Use it to execute various tests. (For details, see I.B "Test Mode.")