Specifications

CHAPTER 3 MECHANICAL SYSTEM
3-10
COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
6) Disconnect the connector shown in the
figure.
7) Push the protrusion of the locking support
shown in the figure, and detach the board
as if to pull it off the locking support.
Figure 3-222
Connector
Scanner cable
Battery board
Locking support
Push the claw.
2. Mounting the Battery Board
1) Mount the battery board to the locking
support, taking care not to place it on the IP
cover or any metal plate.
2) Then, slide SW702 to ‘3’ (ON).
Figure 3-223
3) Mount the harness guide, small cover, and
copyboard glass retainer (right).
SW702