Specifications

CHAPTER 3 MECHANICAL SYSTEM
3-6
COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
6) Insert the fax board halfway in, and check
to make sure that there is no gap around the
connector.
Figure 3-211
7) Fit the ARG cable and the modular harness
into the edge saddle of the expansion unit.
Check to make
sure there is no gap.
FAX board
Figure 3-212
8) Secure the tip of the ARG cable in place as
shown with the screw that comes with the
board.
Edge saddle
ARG cable
Modular harness
Figure 3-213
ARG cable
Screw(w/washer)