Specifications
COPYRIGHT
©
1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3-5
CHAPTER 3 MECHANICAL SYSTEM
3) While supporting the back of J2 on the
NCU PCB, mount the ARG cable. (Be
sure no to apply excess force to the PCB.)
Figure 3-209
FAX board
ARG cable
Modular harness
Connector
Modular harness
NCU board
Speaker cable
4) Put the speaker cable into the wire holder.
5) Connect the connector of the modular
harness to the NCU PCB.
When connecting the connector, be sure to
support the back of the PCB so as to avoid
deforming the PCB.
Figure 3-210