Specifications

COPYRIGHT © 1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3-3
CHAPTER 3 MECHANICAL SYSTEM
4) Remove the screw, and disconnect the
right end of the ARG cable.
Figure 3-203
5) Free the ARG cable from the edge saddle
shown in the figure.
Screw(w/washer)
ARG cable
Figure 3-204
Edge saddle
ARG cable
Modular harness
6) Pull out the fax PCB halfway from the
extension kit; then, disconnect the two
modular harnesses from the NCU PCB.
Figure 3-205
7) Disconnect the ARG cable shown in the
figure.
Fax board
NCU doard
Modular harness
Speaker cable
Figure 3-206
ARG cable
FAX board