Specifications

CHAPTER 3 MECHANICAL SYSTEM

3-2

1999 CANON INC. CANON SUPER G3 FAX BOARD-F1 REV.0 MAY 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

II. DISASSEMBLY/ASSEMBLY

A. Fax Board

1. Removing the Fax Board

Caution:

1. When disconnecting the connectors from the fax PCB or the NCU PCB, take extra care not

to damage the PCBs.

2. When pulling out the fax PCB from the extension kit, check to make sure that the connectors

have fully been disconnected from the PCB.

Screw

PDL cover

1) Turn off the main power. (See I.

“Preparations.”)

2) If the machine has been equipped with a

printer extension function, detach the PDL

face cover and the rear cover (4 screws).

Screws

Extension case cover

Flywheel

Figure 3-201

3) Detach the extension case cover (5

screws).

Figure 3-202