User`s guide

Scanning
42
1
2
3
4
5
FilmGet FS User’s Guide
Adjusting Preview Images
If the preview image is not to your satisfaction, you can use the toolbar to adjust the orientation,
brightness and other settings. The procedures for zooming, rotating, flipping and auto correction are
explained below. For information on adjusting the image brightness or coloring, please see page 71
“Chapter 4 Adjusting Images”.
• Please note that the toolbar is grayed out (except for the film eject tool) when the preview area is empty. No
tools can be selected until an image is previewed.
Zooming an Image for Verification
• Click the zoom in tool to select it. The display will zoom in by a factor of 2 each time you click
the tool on the preview image.
• Click the zoom out tool to select it. The display will zoom out by a factor of 2 each time you click
the tool on the preview image.
• Click the zoom reset tool to restore the display to the default zoom setting.
• The zoom in tool functions merely change the preview area display magnification, and do not affect the
resolution or scan size (See pp. 53, 54) of the scanned image. The preview area may be zoomed up to two
times to magnify the image by a factor of 400%.
• Scroll bars appear on the right and bottom edges of the preview area when it is zoomed. These scroll bars can
be used to change the portion of the image appearing in the window.
• The zoom out tool and zoom reset tool are only activated when the preview image has been zoomed.
Scroll Bars