User`s guide

QUICK START
12
1
2
3
4
5
FilmGet FS User’s Guide
3
Load the film. See p. 30.
4
Set the film type and color mode. See pp. 33 to 35.
(1) Click the main window to switch the window.
(2) Select a film type (color/
monochrome, negative/positive) that
matches the film you are scanning.
(3) Set the color mode (color, grayscale,
or black and white).
5
Make a thumbnail scan of all the frames on the film. See p. 36.
(1) Click the
[Thumbnail…]
button in the main window to display the
thumbnail window.
(2) Click the
[Thumbnail Scan]
button in the thumbnail window.
(1) Hold the film holder horizontally
with the mark facing
upwards.
(3) Insert the end with the
mark into the film
holder slot of the
scanner.
(2) Check that the [R] mark can be seen
properly from the right side.
The thumbnail scan progress bar
will be displayed. Click the
[Cancel]
button if you wish to
stop the thumbnail scan.