Getting Started ENGLISH CEL-SW7ZA210
Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Camera (with body cap) Battery Pack LP-E17 (with terminal cover) Neck Strap EM-300DB Battery Charger LC-E17E Interface Cable IFC-600PCU ● Printed matter is also included. ● For details on the lens included in the lens kit, check information on the camera package. ● A memory card is not included.
Manuals and Software Download camera manuals and software from the following page. http://www.canon.com/icpd/ ● With a computer connected to the Internet, access the above URL. ● Access the site for your country or region. ● Adobe Reader is required to view the manuals. ● For instructions on downloading and installing the software, refer to the Camera User Guide available for download. ● You may be requested to enter the serial number (body number) when downloading the manuals or software.
Initial Preparations 2 Attach the ring. ● Pass the end of the ring through the holder as shown. 3 Turn the ring around. ● Rotate the ring in the direction of (1). ● When rotating the ring, be careful not to pass the strap through the gap in the ring. (1) 4 (1) Secure the ring. ● To secure the ring, slide the cap in the direction of (1) until it clicks into place. ● On the other side of the camera, secure the ring the same way. 5 Insert the battery pack.
Initial Preparations 6 Charge the battery pack. ● Plug the power cord into the charger, then plug the other end into a power outlet. ● The charging lamp turns orange, and charging begins. ● When charging is finished, the lamp turns green. Remove the battery pack. ● For details on charging time and the number of shots or recording time available with a fully charged battery pack, refer to “Specifications” in the downloadable Camera User Guide. 7 (2) (1) ● Slide the cover (1) and open it (2).
Initial Preparations 9 (1) Check your card’s write-protect switch and insert the memory card. ● Recording is not possible on memory cards with a write-protect switch when the switch is in the locked position. Move the switch toward (1). (2) ● Insert the memory card with the label (2) facing as shown until it clicks into place. ● To remove the memory card, push it in until you feel a click, and then slowly release it. 10 Close the cover.
Initial Preparations 13 Specify your home time zone. ● Press the [ ][ ] buttons to choose your home time zone. ● Press the [ ] button when finished. After a confirmation message, the setting screen is no longer displayed. ● To turn off the camera, move the power ]. switch to [ 14 Configure the display language. ● Press the [ ] button. ● Press and hold the [ ] button, and then press the [ ] button. ● Press the [ ][ ][ ][ ] buttons or turn the [ ] dial to choose a language, and then press the [ ] button.
Initial Preparations Attaching a Lens The camera is compatible with EF-M lenses. If you use Mount Adapter EF-EOS M, you can also use EF and EF-S lenses (see the Camera User Guide). (1) 1 2 Make sure the camera is off. Remove the caps. ● Remove the lens cap and body cap by turning them in the directions shown. (2) 3 Attach the lens. ● Align the mount indexes (the white dots) on the lens and camera, and then turn the lens in the direction shown until it clicks into place.
Initial Preparations 5 Prepare to shoot. ● With the lens retraction index aligned with the zoom position index, hold the lens retraction switch toward [ ] as you turn the zoom ring a little in the direction shown, and then release the switch. ● Continue turning the zoom ring until it clicks, indicating that the lens is ready for shooting. ● To retract the lens, hold the lens retraction switch toward [ ] as you turn the zoom ring.
Trying the Camera Out Shooting For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. 1 Turn the camera on and enter [ mode. ● Move the power switch to [ ] ]. ● Hold down the mode dial release button and turn the mode dial to [ ]. 2 Compose the shot. ● When using a zoom lens, zoom by turning the zoom ring on the lens with your fingers. 3 Shoot. Shooting Still Images ● Press the shutter button lightly.
Trying the Camera Out Viewing After shooting images or movies, you can view them on the screen as follows. 1 Enter Playback mode. ● Press the [ 2 ] button. Choose images. ● To view the previous or next image, press the [ ][ ] buttons or turn the [ ] dial. ● Movies are identified by a [ To play movies, go to step 3. 3 ] icon. Play movies. ● Press the [ ] button, press the [ ][ ] buttons to choose [ ], and then press the [ ] button again. ● Playback now begins, and after the movie ] is displayed.
Trademarks and Licensing ● The SDXC logo is a trademark of SD-3C, LLC. Disclaimer ● Unauthorized reproduction of this guide is prohibited. ● Illustrations and screenshots in this guide may differ slightly from the actual equipment. - Interface Cable IFC-600PCU HDMI cable (camera end: Type D): Use a commercially available cable no longer than 2.5 m.
The model number is PC2258 (including WLAN module model WM227 and BLE module model WM500). To identify your model, check the label on the bottom of the camera or behind the tilt-up screen for a number beginning with PC. Countries and Regions Permitting Wireless Function Use - Use of wireless function is restricted in some countries and regions, and illegal use may be punishable under national or local regulations.
