EOS D60 Software Instructions for Windows

2-2
Connecting the Camera to Your Computer
Connect the EOS D60 to your computer with the interface cable so that they can
communicate. You can connect the camera while your computer is running.
You can also set up your software so that ZoomBrowser EX or a TWAIN Driver-compatible
application such as Photoshop 5.0 LE is started when you connect the camera to your computer.
Before connecting the camera to the computer, Windows XP users must select the
program to be started automatically (Photoshop 5.0 LE, ZoomBrowser EX or the
Scanner and Camera wizard). See “To Start Software Automatically (Windows XP)”
(➞2-6). The connection will only function correctly if the automatic start setting is
specified.
1
Plug the interface cable into the computer.
● Plug the cable into the USB port
on the computer.
● The location of the port differs
depending on your computer.
Refer to the User’s Manual for
your computer for details.
2
Plug the interface cable into your camera.
● Open the cover and plug in the
interface cable so that the t mark
on the plug is aligned with the t
beside the DIGITAL terminal.
3
Set the camera’s main switch to <ON>.
\ The [EOS D60 event] dialog box appears.
\ If you are using Windows 2000, the [Event on Device: EOS D60] dialog box
appears.
\ If you are using Windows Me or Windows XP (and you selected [Scanner and
Camera Wizard] in the automatic start settings), the [Scanner and Camera Wizard]
dialog box appears. Click the [Cancel] button to close the [Scanner and Camera
Wizard] dialog box.
\ When automatic software starting is enabled (➞2-5, 2-6), the specified software
starts up.
USB port
Interface
cable
Interface
cable
t mark
DIGITAL terminal
t mark