EOS D30 Software Starter Guide

14
Installing the USB Driver into Windows 2000
Begin by logging onto the computer as an Administrator and then install the USB
driver.
1. Once you have attached the USB cable to the camera and computer, set
the camera’s main switch to [On]. (➜ p. 10)
The “Found New Hardware Wizard” dialog will appear after a moment.
2. Read the dialog and click the [Next] button.
3. Select [Search for a suitable driver for my device (recommended)] and
click the [Next] button.
The dialog will change to the one that allows you to specify the search location.
4. Place the Canon Digital Camera Solution Disk in the CD-ROM drive.
Your camera model
name will appear
here.