Specifications

LEICA
R9
CAMERAS & LENSES
67
PHOTO - VIDEO - PRO AUDIO
ORDER & INFO. [phone] • FAX: [phone] [phone]
1-800-290-6750 • www.bhphotovideo.com
Digital Modul-R (LDMR)
The Digital Modul-R is
a digital camera back
designed for the Leica R8
and R9 cameras. With the
back they become the
world’s first hybrid 35mm
cameras that can be used
optionally for digital or
analog photography.
◆ The image sensor consists of a 10-megapixel CCD sensor specially
produced by Kodak. The integration of the sensor into an existing
camera concept requires that the sensor and its housing be positioned at
the film gate of the R8 or R9. That is why the active surface of the sensor
is smaller than the area of the film gate, limiting the resulting focal
length extension factor to a modest 1.37x. The effective imaging area of
the sensors measures 26.4 x 17.6mm. Sensitivity ranges from ISO 100 to
at ISO 800.
◆ In addition to the high quality picture, the Digital Modul-R provides a
solution that is as compact as possible, with a logical operating
procedure. This means that the settings that are relevant for the
exposure are easy to control by means of a clearly legible display and a
setting dial, without having to use the menu guide on the color monitor.
◆ Functions that can be controlled directly are: sensitivity setting,
resolution, compression, white balance, self-timer, and exposure
corrections. Menu functions on the color monitor are for configuring
the back—setting the user profile, color management, or brightness and
contrast of the color monitor. Because functions can be controlled
directly while shooting by means of the setting dial, the content of the
menu is minimal and it provides a clear overview.
◆ The color monitor on the digital back is used for evaluating the images
stored after the exposures:
– A histogram furnishes detailed information about the dynamics of the
photograph, thus providing the possibility of a differentiated analysis of
the pictorial result.
– An audio histogram signals over- and under-exposures acoustically: The
photographer is assured of correct exposures while working continuous-
ly, without having to move the camera away from the eye.
• Data-formats include RAW, TIFF, 2 JPEG-compression rates; uses
SD-cards for storage; offers an IEEE1394 (Firewire) interface
• BW display shows frame counter, ISO, exposure compensation, battery
status, flash ready signal, self timer, compression rate, resolution, moiré
on/off, white balance.
• Menu includes: sharpness, color saturation, contrast, frame number,
color display brightness and contrast, duration of auto review, histogram
on/off, power save options, card formatting, warning signals, audio his-
togram on/off, date, time, user-profiles, firmware update, reset.
CALL
R9 SPECIFICATIONS
Ty pe : 35mm SLR
Lens Mount: Leica R (NOTE: Older model R lenses fit,
but with limited camera functions)
Focus Modes: Manual
Focus Type: Manual
Focusing Range: Not applicable
Exposure Variable Program, Aperture Priority,
Modes: Shutter Priority, Manual, TTL Flash
and “F” Mode
(for non-dedicated flash & studio lighting)
Exposure - 6-Zone evaluative
Metering: - Centerweighted - Spot
- Built-in flash metering mode for
non-dedicated or studio lighting
Metering Range: EV -2 to 20 (with f/1.4 lens @ ISO 100)
Shutter 1/8000 to 32 seconds + Bulb,
Speed: with flash sync up to 1/250 second,
1/350-1/8000 with Metz module
Exposure
Compensation: ±0.7EV in 1/10 EV increments
Exposure 3 Frames in 1/2 or whole steps with
Bracketing: optional motor drive
ISO Range: • 25-500 (DX) • 6-12800 (manual setting)
Film Wind: Manual (optional winder or
motor drive available)
Focusing Interchangeable (standard screen is matte
Screen: with microprism & split image rangefinder)
Diopter
Correction: Yes (-2 to +2)
Self Timer: 12 or 2-Second delay
Remote Control: Standard mechanical cable release
PC Terminal: Ye s
Depth-of-Field
Preview: Ye s
Mirror Lock-Up: Ye s
Multiple
Exposure: Yes
Viewfinder
Metering type, Metering memory activation,
Information: Flash readiness, Aperture, Shutter speed,
Test flash result and Frame counter,
Low light indicator
Power Source: Two CR2 3-volt lithium batteries
Dimensions: 6.2 x 4.0 x 2.4˝ WxHxD
Weight: 1.74 lb.