Specifications

Compact 35mm rangefinder system camera with electronically controlled shutter plus
two mechanically controlled shutter speeds.
Leica M lenses with focal lengths from 21 to 135mm
Large, bright combined range- and viewfinder with bright-line frames and automatic
parallax compensation. Eyepiece corrected for -0.5 diopter. Correction lenses from ±3
diopters are available.
Bright-line frames are activated in pairs : 28 and 90mm (90mm by itself in the M7
0.85), 35 and 135mm (35mm by itself in the M7 0.58), and 50 and 75 mm. The respec-
tive bright-line frames are activated automatically when a lens is locked in place. Any
desired frame can be previewed by means of the preview lever.
Split-image and coincident-image rangefinder within a bright field in the center of the
viewfinder image.
M7 0.58: 40.2mm;
M7 0.72: 49.9mm;
M7 0.85: 58.9 mm
Selective through-the-lens (TTL) exposure metering at working aperture. Center-
weighted integral TTL metering for flash exposures with dedicated SCA 3000 standard
flash units.
Choice of automatic film speed setting with DX-coded film cartridges from ISO 25 to
ISO 5000 or manual setting from ISO 6 to ISO 25000. By means of the exposure over-
ride (± 2 EV), films with speeds ranging from ISO 1.5/3° to ISO 25000/45° can be used.
Choice of automatic control of the shutter speed – with corresponding viewfinder dis-
play – at a pre-selected f-stop (aperture-priority, or manual setting of shutter speed and
f-stop in accordance with the LED light balance in the viewfinder.
Synchronization: Can be triggered by the first or the second shutter curtain (with an
appropriate flash unit and a SCA-3502 Adapter). Flash synch speed: 1/50 second, set
automatically in the AUTO mode; slower shutter speeds can be used with manual set-
tings; faster shutter speeds (1/250, 1/500, 1/1000) can be used with manual settings if
the flash unit being used offers the “High Speed Synchronization function with an
SCA-3502 Adapter. Flash exposure metering (with an SCA-3501/3502 Adapter, or a
standard SCA-3000 flash unit such as the LEICA SF20) TTL control with center-
weighted integral metering. Film speed range for TTL flash exposure metering ISO
12/12° to ISO 3200/36°. Displays when flash is being used: Readiness: The flash
symbol LED in the viewfinder remains lit. Flash confirmation : The LED remains lit or
it temporarily blinks rapidly after the exposure. Under-exposure is indicated by a
temporary extinction of the LED.
Shutter: Horizontally running, rubberized cloth focal plane shutter. Extremely quiet.
Controlled electronically, plus two mec
hanically-set shutter speeds : 1/60 s and 1/125 s.
Shutter speeds: stepless from 32 to 1/1000 in the AUTO’ automatic shutter speed con-
trol mode. In the manual mode, from 4 to 1/1000 in full steps, plus ‘B’ for time expo-
sures of any length. Flash synch speed 1/50.
Shutter release: Three stages: energizing – metered exposure value storage – release.
Release button has an integrated thread for standard cable releases.
Advancing: Manually with quick wind lever or motorized using LEICA MOTOR-M.
Rewinding: Manually with rewind lever after turning the lever to “R” on the front of
the camera.
Frame counter: On the top of the camera. Resets automatically on removal of base plate.
All-metal body with foldable rear panel. Brass top plate and base plate, both chromium
plated in black or silver
6v power supply (2 lithium cells, type “DL 1/3 N”). Battery check shown by flashing of
the LEDs in the digital display or the light balance or by illumination of the display
“bc” or the LEDs going out.
Camera
Ty pe
Lenses
Viewfinder
Large Base
Rangefinder
Effective
Measurement
Base
Exposure
Metering
Film
Speed
Range
Exposure
Modes
Flash
Exposure
Control
Shutter and
Shutter
Release
Film
Transport
Camera
Body
Operating
Voltage
LEICA
M7
DX Coding & On/Off Switch
The M7 automatically sets the film speed,
or you can set the film speed manually. The
film speed is automatically displayed in the
viewfinder during the first two seconds
after the camera is switched on.
The separate On/Off switch, for ergonomic
reasons, is positioned right next to the
shutter release button and serves to activate
the cameras electronics. The OFF setting
blocks the shutter release.
Flash Sync and Second
Curtain Sync
With a sync time of up to 1/1000 second, the
M7 makes it easy to apply a properly bal-
anced fill-in flash in many daylight situations.
When you want your pictures to convey a
truly natural impression, like the impression
created by a time exposure with fill-in flash,
for instance, the M7 can be set to trigger the
flash with the second shutter curtain.
CAMERAS & LENSES
56
EQUIPMENT LEASING AVAILABLE
PHOTO - VIDEO - PRO AUDIO
M7 SPECIFICATIONS
M7 Bodies and Kits
All M7 bodies include a neck strap, body
cap, two 3v lithium batteries, 5-year limited
warranty and Leica 3-year Passport warranty.
“50 Year M System
Special Edition Set
(LEM7K)
Includes M7 TTL .72 titanium body, 50mm
f/1.4 Summilux M ASPH titanium lens,
leather neck strap, black cloth-bound
velvet-lined storage box, leather lens pouch,
“50 Years of Leica M” book..............10,800.00
M7 “Starter Set”
(LEM7SS)
Includes M7 TTL .72 black body, 50mm f/2.0
Summicron M lens ..............................3795.00
M7 TTL .58 Black Body
(LEM7TTL.58B)
0.58x viewfinder magnification ..................2895.00
M7 TTL .72 Black Body
(LEM7TTL.72B)
0.58x viewfinder magnification ..................2895.00
M7 TTL .85 Black Body
(LEM7TTL.85B)
0.58x viewfinder magnification ..................2895.00
M7 TTL .58 Silver Body
(LEM7TTL.58S)
0.58x viewfinder magnification ..................2895.00
M7 TTL .72 SilverBody
(LEM7TTL.72S)
0.58x viewfinder magnification ..................2895.00
M7 TTL .85 Silver Body
(LEM7TTL.85S)
0.58x viewfinder magnification ..................2895.00