Wi-Fi (Wireless Communication) Function Instruction Manual ENGLISH INSTRUCTION MANUAL
Introduction What You Can Do Using the Wi-Fi (Wireless Communication) Functions (1) Communicate with a smartphone (2) Send images between cameras (CANON iMAGE GATEWAY) (6) Send images to a Web service (5) Print images using a Wi-Fi printer (3) Save images to Canon Connect Station (4) Operate remotely using EOS Utility 2
Introduction (1) q Communicate with a smartphone (p.19, 47, 55) Connect the camera to a smartphone or tablet via Wi-Fi and use the dedicated application “Camera Connect” to operate the camera remotely or view images stored in the camera. In this manual and on the camera’s LCD monitor, “smartphone” refers to smartphones and tablets. (2) z Send images between cameras (p.61) Connect this camera and other Canon cameras with built-in wireless communication functions via Wi-Fi and send images between them.
Introduction Wi-Fi Connection Using the Bluetooth Function This camera can be connected easily to a smartphone compatible with Bluetooth low energy technology* via Wi-Fi. For details, see page 19. * Hereafter referred to as “Bluetooth”. Wi-Fi Connection Using the NFC Function This camera is compatible with NFC (Near Field Communication) that enables you to easily establish a Wi-Fi connection between the camera and a smartphone or Connect Station (sold separately). For details, see page 47 or 73.
Conventions Used in this Manual In this manual, the term “access point” indicates wireless LAN routers, etc. that relay Wi-Fi connections. The camera does not come with an interface cable. Icons in this Manual <6> : Indicates the Main Dial. : Indicate up, down, left, and right on the cross keys respectively. <0> : Indicates the Setting button.
Structure of This Manual This manual is structured as follows. After finishing preparation for a Wi-Fi connection in “Getting Started”, see the corresponding pages to set up a Wi-Fi connection according to your needs. 1 Getting Started (p.11) 2 Connecting to a Bluetooth3 4 5 6 7 8 9 compatible Smartphone via Wi-Fi (p.19) Connecting to an NFCcompatible Smartphone via Wi-Fi (p.47) Connecting to a Smartphone via Wi-Fi with the Button (p.55) Connecting to Another Camera via Wi-Fi (p.
Contents Introduction 2 What You Can Do Using the Wi-Fi (Wireless Communication) Functions .......................................................................................... 2 Conventions Used in this Manual .....................................................5 Structure of This Manual ...................................................................6 1 Getting Started 11 Setting Wi-Fi Settings .....................................................................
Contents 4 Connecting to a Smartphone via Wi-Fi with the Button 55 Establishing a Wi-Fi Connection..................................................... 56 5 Connecting to Another Camera via Wi-Fi 61 Establishing a Wi-Fi Connection..................................................... 62 Sending Images to the Other Camera............................................ 64 6 Connecting to Connect Station via Wi-Fi 73 Saving Images.....................................................................
Contents 10 Advanced Wi-Fi Connection 107 Checking the Type of Access Point .............................................. 109 Establishing a Wi-Fi Connection with WPS (PBC Mode).............. 110 Establishing a Wi-Fi Connection with WPS (PIN Mode) ............... 114 Connecting to a Detected Network Manually via Wi-Fi................. 118 11 Reconnecting via Wi-Fi 125 Reconnecting via Wi-Fi .................................................................
Contents 14 Reference 157 [Wireless communication settings] Screen .............................. 158 [Wi-Fi settings] Screen................................................................ 159 Virtual Keyboard Operation .......................................................... 160 Setting up the IP Address Manually ............................................. 161 Wireless Communication Status................................................... 163 Specifications .......................................
1 Getting Started 11
Setting Wi-Fi Settings First, follow the steps below to set the Wi-Fi settings. 1 Press the button. 2 Select [Wi-Fi settings]. 3 Select [Wi-Fi]. 4 Select [Enable]. You can also set the Wi-Fi settings with [Wi-Fi settings] under [51: Wireless communication settings].
Setting Wi-Fi Settings [Nickname]. 5 Register When the screen on the left appears, press <0>. The screen on the left will appear. When using the displayed nickname, press the button. Otherwise, enter any characters between 1 to 8 characters in length. For instructions on entering characters, see page 160. When you finish entering, press the button. the setting. 6 Exit When the screen on the left appears, select [OK], then press <0>.
Setting Wi-Fi Settings When video snapshot or time-lapse movie is set, you cannot select [51: Wireless communication settings]. Interface Cable Connection Cautions With a Wi-Fi connection established, you cannot use the camera by connecting it to Connect Station, a computer, a GPS receiver, or another device with an interface cable. Terminate the connection before connecting the interface cable.
Preparation for Smartphones To connect the camera to a smartphone, a smartphone on which Android or iOS is installed is necessary. In addition, the dedicated application Camera Connect (free of charge) must be installed on the smartphone. Camera Connect can be installed from the Google Play or App Store. The Google Play or App Store can also be accessed using the QR codes that appear when connecting the camera to a smartphone (p.22, 57).
Preparation for Web Services Signing Up as a CANON iMAGE GATEWAY Member To send images to Web services, you need to sign up as a CANON iMAGE GATEWAY member (free of charge). Once you are a CANON iMAGE GATEWAY member, you can publish photos you took in online albums and use a range of services. This website also serves as a platform for sharing images on registered Web services. Connect to the Internet from a computer or other device, access the Canon website (www.canon.
Preparation for Web Services Specifying Settings to Use Web Services Start EOS Utility on the computer, log in to CANON iMAGE GATEWAY, then specify the camera’s settings to enable access to Web services. For details, refer to the EOS Utility Instruction Manual. For how to obtain the EOS Utility Instruction Manual, refer to the Camera Instruction Manual. The general procedure for sending images to a Web service is as follows. 1 Install EOS Utility on a computer.
2 Connecting to a Bluetooth-compatible Smartphone via Wi-Fi This section describes how to connect the camera to a Bluetooth-compatible smartphone via Wi-Fi. Connecting to a smartphone via Wi-Fi enables you to perform the following: • View images stored in the camera on a smartphone or save viewed images to a smartphone. • Operate the camera to take a picture or change camera settings using a smartphone. • Send images to a smartphone from the camera.
Bluetooth Connection When you connect the camera to a Bluetooth-compatible smartphone via Bluetooth, you can establish a Wi-Fi connection by operating only the camera or the smartphone. Note that pairing between the camera and smartphone is required to connect the camera to a smartphone via Bluetooth. Pairing will be done as part of the Bluetooth connection procedure.
Establishing a Bluetooth Connection To connect the camera to a smartphone via Bluetooth, refer to the Camera Connect’s “Easy Connection Guide” or follow the steps below. Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in advance (p.12). Operation on the Camera-1 1 Select the [Function settings] tab. Press the button to display the main tabs. Select the [Function settings] tab, then press <0>. [Wireless communication 2 Select settings].
Establishing a Bluetooth Connection 5 Select [Smartphone]. 6 Select [Pairing]. [Do not display]. 7 Select If Camera Connect is already installed, select [Do not display] and press <0>. If Camera Connect is not installed, select [Android] or [iOS] on the screen on the left, scan the displayed QR code with the smartphone, then access Google Play or the App Store and install Camera Connect. The screen on the left will appear and pairing will start.
Establishing a Bluetooth Connection Operation on the Smartphone the smartphone’s 8 Activate Bluetooth function. 9 Start Camera Connect. the camera to pair with. 10 Select Tap on the nickname of the camera to be paired. iOS When the screen on the left appears, tap on [Pair].
Establishing a Bluetooth Connection Operation on the Camera-2 11 Select [OK]. <0>. 12 Press Pairing will complete and the camera will be connected to the smartphone via Bluetooth. An illustration indicating that a Bluetooth connection has been established will appear on Camera Connect. With a Bluetooth connection established, you can operate the camera to send images to the smartphone. For details, see page 33.
Establishing a Wi-Fi Connection When a Bluetooth connection is established, follow the steps below to establish a Wi-Fi connection. Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in advance (p.12). 1 Select a Camera Connect function. Select the Camera Connect function you want to use. For the Camera Connect functions, see page 28. Android A Wi-Fi connection will be established automatically. When a Wi-Fi connection is established, the screen for the selected function will appear.
Establishing a Wi-Fi Connection iOS SSID (network name) the SSID and password. 2 Check Check the SSID (network name) and password displayed on the camera. Password the smartphone to 3 Operate establish a Wi-Fi connection. On the smartphone’s Wi-Fi function screen, select the SSID checked in step 2. For the password, enter the password checked in step 2. The password will not be required from the next time you connect the camera to the smartphone via Wi-Fi. Camera Connect will appear.
Establishing a Wi-Fi Connection Android and iOS The [qWi-Fi on] screen will appear on the camera’s LCD monitor. An illustration indicating that a Wi-Fi connection has been established will appear on Camera Connect. The Wi-Fi connection to a Bluetoothcompatible smartphone is now complete. For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (p.29). Terminating the Wi-Fi connection will switch the camera to the Bluetooth connection.
Operating the Camera Using a Smartphone You can use a smartphone with Camera Connect installed to view images stored in the camera or perform remote shooting, etc. Camera Connect Main Window The main functions of Camera Connect are described below. [Images on camera] Images stored in the camera can be viewed. Images stored in the camera can be saved on a smartphone. Operations such as deletion can be performed on images stored in the camera.
Operating the Camera Using a Smartphone Terminating the Wi-Fi Connection To terminate the Wi-Fi connection, perform either of the following operations. On the smartphone’s Camera Connect screen, tap on [T]. On the camera’s [qWi-Fi on] screen, select [Disconnect,exit]. If the [qWi-Fi on] screen is not displayed, press the button. Select [Disconnect,exit], then select [OK] on the confirmation dialog to terminate the Wi-Fi connection.
Operating the Camera Using a Smartphone When the Wi-Fi connection is terminated while recording a movie with remote shooting, the camera responds as follows: • When the power switch is set to , movie shooting continues. • When the power switch is set to <1>, movie shooting stops. When the power switch is set to <1> and the movie mode is set using Camera Connect, you cannot shoot by operating the camera. With a Wi-Fi connection to a smartphone established, certain functions are unavailable.
[Bluetooth function] Screen On the [Bluetooth function] screen (step 3 on page 21), you can change or check the Bluetooth function settings. [Bluetooth function] Select the device to pair with the camera. If you will not use the Bluetooth function, select [Disable]. [Pairing] Pair the camera with the device selected in [Bluetooth function]. [Check/clear connection info] You can check the name and communication status of the paired device. To remove the paired device, press the button.
Removing a Paired Device’s Registration To pair the camera with another smartphone, remove the currently paired device’s registration. Operation on the Camera 1 Select [Check/clear connection info]. On the [Bluetooth function] screen (p.21), select [Check/clear connection info], then press <0>. 2 Press the button. the device registration. 3 Remove When the screen on the left appears, select [OK], then press <0>. Operation on the Smartphone the camera registration.
Sending Images to a Smartphone from the Camera While a Bluetooth connection (Android only) or Wi-Fi connection is established, you can operate the camera to send images to a smartphone. There are two send methods. (1) Select [Send images to smartphone] from the camera menu. (2) Send images from the Quick Control screen during playback (p.34). (1) Selecting [Send images to smartphone] Select [Send images to smartphone] from the camera menu and send images.
Sending Images to a Smartphone from the Camera (2) Quick Control During Playback Send images from the Quick Control screen during playback. 1 Connect the camera to a smartphone via Bluetooth (Android only) or Wi-Fi (p.25). back the image. 2 Play Press the <3> button to play back images. the button. 3 Press The Quick Control screen will appear. [q]. 4 Select If you perform this step with a Bluetooth connection established, a message will appear and a Wi-Fi connection will start.
Sending Images to a Smartphone from the Camera Sending Images Individually Select and send images individually. 1 Select an image to send. Press the keys of the cross keys to select an image to send, then press <0>. By pressing the button, you can switch to the index display and select an image. [Send img shown]. 2 Select To select a size at which to send the image, select [Resize image] and press <0>. Select [Send img shown] and press <0> to send the image displayed.
Sending Images to a Smartphone from the Camera Sending Multiple Selected Images Select multiple images and send them at once. If the multiple image selection screen is already displayed, start the operation from step 3. 1 Press <0>. 2 Select [Send selected]. the images to send. 3 Select Press the keys of the cross keys to select an image to send, then press <0>. A checkmark [X] will be displayed on the upper left of the screen.
Sending Images to a Smartphone from the Camera [Resize image]. 4 Select Set it as necessary. On the displayed screen, select an image size, then press <0>. [Send]. 5 Select The images will be sent. When the transfer is complete, the screen for step 1 will reappear. To send other images, repeat steps 1 to 5.
Sending Images to a Smartphone from the Camera Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. 1 Press <0>. 2 Select [Send range]. the range of images. 3 Specify Select the first image, then press <0>. Select the last image, then press <0>. The [X] icon will appear on the selected images. To cancel the selection, repeat this step.
Sending Images to a Smartphone from the Camera the range. 4 Confirm Press the button. [Resize image]. 5 Select Set it as necessary. On the displayed screen, select an image size, then press <0>. [Send]. 6 Select The images will be sent. When the transfer is complete, the screen for step 1 will reappear.
Sending Images to a Smartphone from the Camera Sending All Images on the Card Send all images on the card at once. 1 Press <0>. 2 Select [Send all card]. [Resize image]. 3 Select Set it as necessary. On the displayed screen, select an image size, then press <0>. [Send]. 4 Select The images will be sent. When the transfer is complete, the screen for step 1 will reappear.
Sending Images to a Smartphone from the Camera Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Setting Image Search Conditions” in the Camera Instruction Manual. 1 Press <0>. 2 Select [Send all found]. [Resize image]. 3 Select Set it as necessary. On the displayed screen, select an image size, then press <0>. [Send]. 4 Select The images will be sent.
Sending Images to a Smartphone from the Camera Ending Image Transfer 1 Press the button. If you send images by operating the camera with a Wi-Fi connection established, the previous screen will reappear. The Wi-Fi connection will not be terminated. If you send images by operating the camera with a Bluetooth connection established, the screen on the left will appear. Select [OK], then press <0> to terminate the Wi-Fi connection.
Specifying Viewable Images You can specify images viewable on a smartphone by operating the camera. Images can be specified after the Wi-Fi connection is terminated. 1 Press the button. [q]. 2 Select If the history (p.126) is displayed, switch the screen with the keys. If the [Wireless communication settings] screen is displayed, set the Wi-Fi settings (p.12). 3 Select [Edit device information]. a smartphone. 4 Select Select the smartphone on which you want to make the images viewable.
Specifying Viewable Images 5 Select [Viewable imgs]. an item. 6 Select Select [OK] and press <0> to display the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting-date basis. Images shot up to nine days ago can be specified. Select an item, then press <0>. When [Images shot in past days] is selected, images shot up to the specified number of days before the current date become viewable.
Specifying Viewable Images [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Select a rating, then press <0> to specify the viewable images. [File number range] (Select range) First image Last image Select the first and last images from images arranged by the file number to specify the viewable images. 1 Press the keys to select the first image to be set as viewable.
3 Connecting to an NFC-compatible Smartphone via Wi-Fi This section describes how to connect the camera to an NFC-compatible smartphone via Wi-Fi. Connecting to a smartphone via Wi-Fi enables you to perform the following: • View images stored in the camera on a smartphone or save viewed images to a smartphone. • Operate the camera to take a picture or change camera settings using a smartphone. • Send images to a smartphone from the camera.
Wi-Fi Connection to an NFC-compatible Smartphone NFC-compatible smartphones can be connected via Wi-Fi by touching them to the camera. Smartphones labeled with the p mark are NFC-compatible. Some smartphones are NFC-compatible even if they are not labeled with the p mark. In such a case, check the NFC antenna position by referring to the smartphone’s instruction manual. For the smartphone’s NFC setting, refer to the smartphone’s instruction manual.
Wi-Fi Connection to an NFC-compatible Smartphone The camera cannot be connected to two or more smartphones at the same time. When touching the smartphone to the camera, be careful not to drop the camera or smartphone. Do not touch the smartphone to the camera with too much force. Doing so can scratch the camera or smartphone. Just holding the smartphone close to the camera may not establish a connection. Be sure to touch the camera with the smartphone so that they come into contact with each other.
Establishing a Wi-Fi Connection To connect the camera to an NFC-compatible smartphone via Wi-Fi, refer to the Camera Connect’s “Easy Connection Guide” or follow the steps below. (1) Turn on the camera and smartphone. (2) Enable the NFC function on the camera and smartphone. (3) Touch the smartphone to the camera so that they come into contact with each other. For the camera’s NFC setting, see page 12.
Establishing a Wi-Fi Connection a Wi-Fi connection. 3 Establish When a connection is established, the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone via NFC, this screen will not appear again. To specify viewable images, press the button. See step 6 on page 44 to set them. Select [OK] and press <0>. After a message is displayed, the [qWi-Fi on] screen will appear. [qWi-Fi on] Screen [Disconnect,exit] Terminates the Wi-Fi connection.
Establishing a Wi-Fi Connection The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect. See page 28. For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (p.29). To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (p.125).
Sending Images from the Camera to a Smartphone By touching an NFC-compatible smartphone to the camera while playing back an image on the camera, you can establish a Wi-Fi connection automatically and send the image to the smartphone even if a Bluetooth or Wi-Fi connection has not been established beforehand. On the [Wi-Fi settings] screen, set [Wi-Fi] to [Enable] and set [NFC connection] to [Enable] in advance (p.12).
Sending Images from the Camera to a Smartphone the image transfer. 4 End Press the button on the image transfer screen. Select [OK] on the screen on the left, then press <0> to end the image transfer and terminate the Wi-Fi connection. If necessary, also read “NFC Function Cautions” (p.49). During the image transfer operation, a picture cannot be taken even if the camera’s shutter button is pressed.
4 Connecting to a Smartphone via Wi-Fi with the Button This section describes how to connect the camera to a smartphone via Wi-Fi using the button. Connecting to a smartphone via Wi-Fi enables you to perform the following: • View images stored in the camera on a smartphone or save viewed images to a smartphone. • Operate the camera to take a picture or change camera settings using a smartphone. • Send images to a smartphone from the camera.
Establishing a Wi-Fi Connection To connect the camera to a smartphone via Wi-Fi, refer to the Camera Connect’s “Easy Connection Guide” or follow the steps below. Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in advance (p.12). Operation on the Camera-1 1 Press the button. [q] (Connect to 2 Select smartphone). If the history (p.126) is displayed, switch the screen with the keys. If the [Wireless communication settings] screen is displayed, set the Wi-Fi settings (p.12).
Establishing a Wi-Fi Connection [Do not display]. 4 Select If Camera Connect is already installed, select [Do not display] and press <0>. If Camera Connect is not installed, select [Android] or [iOS] on the screen on the left, scan the displayed QR code with the smartphone, then access Google Play or the App Store and install Camera Connect. SSID (network name) the SSID and password. 5 Check Check the SSID (network name) and password displayed on the camera’s LCD monitor.
Establishing a Wi-Fi Connection Operation on the Smartphone Smartphone’s screen (sample) the smartphone to 6 Operate establish a Wi-Fi connection. Activate the smartphone’s Wi-Fi function, then select the SSID (network name) checked in step 5. For the password, enter the password checked in step 5. Camera Connect. 7 Start When the [Waiting to connect] screen is displayed on the camera’s LCD monitor, start Camera Connect on the smartphone. the camera to connect to 8 Select via Wi-Fi.
Establishing a Wi-Fi Connection Operation on the Camera-2 a Wi-Fi connection. 9 Establish When a connection is established, the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone via NFC, this screen will not appear again. To specify viewable images, press the button. See step 6 on page 44 to set them. Select [OK] and press <0>. After a message is displayed, the [qWi-Fi on] screen will appear.
Establishing a Wi-Fi Connection The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect. See page 28. For how to terminate the Wi-Fi connection, see “Terminating the Wi-Fi Connection” (p.29). To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (p.125).
5 Connecting to Another Camera via Wi-Fi This section describes how to easily connect this camera and other Canon cameras via Wi-Fi with built-in Wi-Fi functions. Wi-Fi connection is possible with Canon cameras with built-in Wi-Fi functions released in and after 2012 supporting image transfer between cameras. Note that the camera cannot be connected to Canon camcorders via Wi-Fi, even if they have built-in Wi-Fi functions. Still photos can be transferred only if their file format is JPEG.
Establishing a Wi-Fi Connection Connect the camera to another camera via Wi-Fi. The camera can be connected to only one camera at a time. 1 Press the button. Select [z] (Transfer imgs 2 between cameras). If the history (p.126) is displayed, switch the screen with the keys. If the [Wireless communication settings] screen is displayed, set the Wi-Fi settings (p.12). [Register a device for 3 Select connection]. up the target camera.
Establishing a Wi-Fi Connection the images to send. 5 Select Select images on the camera sending the images (p.64). Do not operate the camera receiving the images. Note that GPS information is not displayed on the camera’s playback screen even if GPS information is appended to the received image. Shooting locations can be viewed on a virtual map, using Map Utility (EOS software). The connection settings are saved/registered with the nickname of the camera to which a Wi-Fi connection was established.
Sending Images to the Other Camera Sending Images Individually Select and send images individually. 1 Select an image to send. Press the keys of the cross keys to select an image to send, then press <0>. By pressing the button, you can switch to the index display and select an image. [Send img shown]. 2 Select To select a size at which to send the image, select [Resize image] and press <0>. Select [Send img shown] and press <0> to send the image displayed.
Sending Images to the Other Camera Sending Multiple Selected Images Select multiple images to send them at once. 1 Press <0>. 2 Select [Send selected]. the images to send. 3 Select Press the keys of the cross keys to select an image to send, then press <0>. A checkmark [X] will be displayed on the upper left of the screen. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button.
Sending Images to the Other Camera [Resize image]. 4 Select Set it as necessary. On the displayed screen, select an image size, then press <0>. [Send]. 5 Select The images will be sent. When the transfer is complete, the screen for step 1 will reappear. To send other images, repeat steps 1 to 5. the Wi-Fi connection. 6 Terminate Press the button to display the confirmation dialog. Select [OK], then press <0> to terminate the connection.
Sending Images to the Other Camera Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. 1 Press <0>. 2 Select [Send range]. the range of images. 3 Specify Select the first image, then press <0>. Select the last image, then press <0>. Images will be selected and [X] will appear. To cancel the selection, repeat this step. To return to the previous screen, press the button. the range. 4 Confirm Press the button.
Sending Images to the Other Camera [Resize image]. 5 Select Set it as necessary. On the displayed screen, select an image size, then press <0>. [Send]. 6 Select The images will be sent. When the transfer is complete, the screen for step 1 will reappear. the Wi-Fi connection. 7 Terminate Press the button to display the confirmation dialog. Select [OK], then press <0> to terminate the Wi-Fi connection.
Sending Images to the Other Camera Sending All Images on the Card Send all images on the card at once. 1 Press <0>. 2 Select [Send all card]. [Resize image]. 3 Select Set it as necessary. On the displayed screen, select an image size, then press <0>. [Send]. 4 Select The images will be sent. When the transfer is complete, the screen for step 1 will reappear.
Sending Images to the Other Camera the Wi-Fi connection. 5 Terminate Press the button to display the confirmation dialog. Select [OK], then press <0> to terminate the Wi-Fi connection. Sending Images that Match the Search Conditions Send images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Setting Image Search Conditions” in the Camera Instruction Manual. 1 Press <0>. 2 Select [Send all found].
Sending Images to the Other Camera [Resize image]. 3 Select Set it as necessary. On the displayed screen, select an image size, then press <0>. [Send]. 4 Select The images will be sent. When the transfer is complete, the screen for step 1 will reappear. the Wi-Fi connection. 5 Terminate Press the button to display the confirmation dialog. Select [OK], then press <0> to terminate the Wi-Fi connection.
Sending Images to the Other Camera With a Wi-Fi connection established, a picture cannot be taken even if the camera’s shutter button is pressed. To terminate the Wi-Fi connection during image transfer, select [Cancel] on the camera, then terminate the Wi-Fi connection. RAW images cannot be sent. When sending a large number of images or large files (total size), make sure to check the remaining battery level.
6 Connecting to Connect Station via Wi-Fi Connect Station (sold separately) is a device that allows you to import captured still photos and movies for viewing on your TV set, smartphone, etc., or sharing over a network. You can easily save still photos and movies to Connect Station by holding this camera close to Connect Station.
Saving Images This section describes how to connect the camera and Connect Station (sold separately) via Wi-Fi using the NFC function. To save images in other ways, refer to the Connect Station Instruction Manual. On the [Wi-Fi settings] screen, set [Wi-Fi] to [Enable] and set [NFC connection] to [Enable] in advance (p.12, 159). 1 NFC connect point Hold the camera close to Connect Station.
Saving Images If necessary, also read “NFC Function Cautions” (p.49). While saving images, a picture cannot be taken even if the camera’s shutter button is pressed. Do not drop the camera on Connect Station or touch the camera to it with too much force. Doing so may damage Connect Station’s internal hard disk. If the camera is not recognized right away, try holding it close to Connect Station and slowly moving it or rotating it horizontally.
7 Connecting to EOS Utility via Wi-Fi This section describes how to connect the camera directly to a computer via Wi-Fi. Install EOS Utility on the computer before setting up a Wi-Fi connection. To connect via Wi-Fi using an access point, see “Advanced Wi-Fi Connection” (p.107). Settings may be disabled when an older version of software is used. Install a version of EOS Utility that is compatible with this camera.
Establishing a Wi-Fi Connection To establish a Wi-Fi connection, operations on the computer are required. For details, refer to the computer’s instruction manual. The configuration procedure is as follows, using Windows 8.1 as an example. Operation on the Camera-1 1 Press the button. [D] (Remote control (EOS 2 Select Utility)). If the history (p.126) is displayed, switch the screen with the keys. If the [Wireless communication settings] screen is displayed, set the Wi-Fi settings (p.
Establishing a Wi-Fi Connection Operation on the Computer-1 Computer’s screen (sample) the SSID, then enter the 5 Select password. On the computer’s network setting screen, select the SSID checked in step 4. For the password, enter the password checked in step 4. Operation on the Camera-2 [OK]. 6 Select Select [OK] and press <0>. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected.
Establishing a Wi-Fi Connection Operation on the Computer-2 7 Start EOS Utility. EOS Utility, click [Pairing over 8 InWi-Fi/LAN]. If a firewall-related message is displayed, select [Yes]. [Connect]. 9 Click Select the camera to connect to, then click [Connect]. Operation on the Camera-3 a Wi-Fi connection. 10 Establish When the camera detects the computer on which you clicked [Connect] in step 9, the screen on the left is displayed. Select [OK] and press <0>. The [DWi-Fi on] screen will appear.
Establishing a Wi-Fi Connection [DWi-Fi on] Screen [Disconnect,exit] Terminates the Wi-Fi connection. [Confirm set.] You can check the settings. [Error details] When a Wi-Fi connection error occurs, you can check the details of the error. The Wi-Fi connection to a computer is now complete. Operate the camera using EOS Utility on the computer. See page 82. To reconnect via Wi-Fi, see “Reconnecting via Wi-Fi” (p.125).
Operating the Camera Using EOS Utility For EOS Utility operation procedures, refer to the EOS Utility Instruction Manual. In addition to remote shooting, various camera operations are available. For how to obtain the EOS Utility Instruction Manual, refer to the Camera Instruction Manual. When the Wi-Fi connection is terminated while recording a movie with remote shooting, the camera responds as follows: • When the power switch is set to , movie shooting continues.
8 Connecting to a Printer via Wi-Fi This section describes how to connect the camera directly to a printer via Wi-Fi. Wi-Fi connection is possible with Wi-Fi printers supporting PictBridge (Wireless LAN). To connect via Wi-Fi using an access point, see “Advanced Wi-Fi Connection” (p.107). When in the <8: FG> or modes or when Multi Shot Noise Reduction is set, the camera cannot be connected to a printer via Wi-Fi.
Establishing a Wi-Fi Connection Follow the procedure in “Getting Started” (p.11) to enable a Wi-Fi connection between a printer and the camera. To establish a Wi-Fi connection, operations on the printer are required. For details, refer to the printer’s instruction manual. 1 Press the button. [l] (Print from Wi-Fi 2 Select printer). If the history (p.126) is displayed, switch the screen with the keys. If the [Wireless communication settings] screen is displayed, set the Wi-Fi settings (p.
Establishing a Wi-Fi Connection the printer to connect it 5 Operate to the camera via Wi-Fi. On the Wi-Fi settings menu of the printer to be used, select the SSID you have checked. For the password, enter the password checked in step 4. the printer to connect to 6 Select via Wi-Fi. When a list of detected printers appears, select the printer to connect to via Wi-Fi, then press <0>. Some printers may make a beeping sound.
Printing Images Printing Images Individually Select and print images individually. 1 Select an image to print. Press the keys of the cross keys to select an image to print, then press <0>. By pressing the button, you can switch to the index display and select an image. [Print image]. 2 Select The print setting screen will appear. the image. 3 Print For the print setting procedures, see page 89. When [Print] is selected, printing starts.
Printing Images Printing by Specifying the Options Print by specifying the printing options. 1 Press <0>. [Print order]. 2 Select The [Print order] screen will appear. the printing options. 3 Set For the setting procedures, refer to “Digital Print Order Format (DPOF)” in the Camera Instruction Manual. If the print order is complete before establishing a Wi-Fi connection, proceed to step 4. [Print]. 4 Select [Print] can be selected only when an image is selected and printer is ready to print.
Printing Images [OK]. 6 Select When printing is complete, the screen for step 3 will reappear. the Wi-Fi connection. 7 Terminate Press the button to display the confirmation dialog. Select [OK], then press <0> to terminate the Wi-Fi connection. With a Wi-Fi connection to a printer established, a picture cannot be taken even if the camera’s shutter button is pressed. Movies cannot be printed. Before printing, be sure to set the paper size. Certain printers may not imprint the file number.
Print Settings Specify settings for printing as necessary. The screen display and setting options vary depending on the printer. Some settings may not be available. For details, refer to the printer’s instruction manual. Print setting screen Sets the printing effects (p.91). Sets the date or file number imprinting to on or off (p.92). Sets the quantity to be printed (p.92). Sets the print area (p.93). Sets the paper size, type, and layout (p.90). Returns to the image selection screen. Starts the printing.
Print Settings Q Setting the Paper Size Select the size of the paper loaded in the printer, then press <0>. The paper type screen will appear. Y Setting the Paper Type Select the type of the paper loaded in the printer, then press <0>. The page layout screen will appear. U Setting the Page Layout Select the page layout, then press <0>. The print setting screen will reappear. Borderless Prints with no borders. If your printer cannot print borderless prints, the print will have borders.
Print Settings Setting the Printing Effects (Image Optimization) Contents displayed on the screen vary depending on the printer. Select the option, then press <0>. Select the desired printing effect, then press <0>. Printing Effect Description EDefault Printing differs depending on the printer. For details, refer to the printer’s instruction manual. EOn Prints with the printer’s standard colors. The image’s Exif information is used to make automatic corrections.
Print Settings Setting the Date/File Number Imprinting Select [I], then press <0>. Set the print settings as desired, then press <0>. Setting the Number of Copies Select [R], then press <0>. Set the number of copies, then press <0>. The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. Refer to the printer’s instruction manual to find out what the [Default] settings are.
Print Settings Cropping the Image You can crop the image and print only an enlarged version of the cropped portion, as if the image is recomposed. Set the cropping right before printing. If you change the print settings after setting the cropping, you may have to set the cropping again before printing. 1 On the print setting screen, select [Cropping]. 2 Set the cropping frame size, position, and aspect ratio. The image area within the cropping frame will be printed.
Print Settings Depending on the printer, the cropped image area may not be printed as you specified. The smaller you make the cropping frame, the grainier the picture will look in the print. Handling Printer Errors If printing does not resume after you resolve a printer error (no ink, no paper, etc.) and select [Continue], operate the buttons on the printer to resume printing. For details on resuming printing, refer to the printer’s instruction manual.
9 Sending Images to a Web Service You can register various Web services on the camera and send images stored in the camera to them.
Establishing a Wi-Fi Connection Follow the procedures in “Preparation for Web Services” (p.16) to enable a Wi-Fi connection between the Web service and the camera. 1 Press the button. the Web service you have 2 Select registered on page 17. If the history (p.126) is displayed, switch the screen with the keys. A screen to select a destination may appear depending on the type and settings of the Web service you select. For details, see page 123. to an access point via 3 Connect Wi-Fi.
Sending Images to a Web Service You can share images with your family and friends by sending images from the camera to a Web service registered on the camera or by sending Web links of the online albums. Sending Images Individually Select and send images individually. 1 Select an image to send. Press the keys of the cross keys to select an image to send, then press <0>. By pressing the button, you can switch to the index display and select an image. [Send img shown].
Sending Images to a Web Service Sending Multiple Selected Images Select multiple images to send them at once. 1 Press <0>. 2 Select [Send selected]. the images to send. 3 Select Press the keys of the 98 cross keys to select an image to send, then press <0>. A checkmark [X] will be displayed on the upper left of the screen. By pressing the button, you can select images from a three-image display. To return to the single-image display, press the button.
Sending Images to a Web Service [Resize image]. 4 Select Set it as necessary. When YouTube is selected as the destination, [Resize image] is not displayed. On the displayed screen, select an image size, then press <0>. [Send]. 5 Select The images will be sent. On the screen to complete the process for sending the image, select [OK] to terminate the Wi-Fi connection and return to the screen to select a Web service.
Sending Images to a Web Service Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. 1 Press <0>. 2 Select [Send range]. the range of images. 3 Specify Select the first image, then press <0>. Select the last image, then press <0>. Images will be selected and [X] will appear. To cancel the selection, repeat this step. To return to the previous screen, press the button. the range. 4 Confirm Press the button.
Sending Images to a Web Service [Resize image]. 5 Select Set it as necessary. On the displayed screen, select an image size, then press <0>. [Send]. 6 Select The images will be sent. On the screen to complete the process for sending the image, select [OK] to terminate the Wi-Fi connection and return to the screen to select a Web service. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree].
Sending Images to a Web Service Sending All Images on the Card Send all the images on the card at once. 1 Press <0>. 2 Select [Send all card]. [Resize image]. 3 Select Set it as necessary. On the displayed screen, select an image size, then press <0>.
Sending Images to a Web Service [Send]. 4 Select The images will be sent. When the transfer is complete, the screen for step 1 will reappear. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. The screen can be scrolled up and down by pressing the keys.
Sending Images to a Web Service Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Setting Image Search Conditions” in the Camera Instruction Manual. 1 Press <0>. 2 Select [Send all found]. [Resize image]. 3 Select Set it as necessary. On the displayed screen, select an image size, then press <0>.
Sending Images to a Web Service [Send]. 4 Select The images will be sent. On the screen to complete the process for sending the image, select [OK] to terminate the Wi-Fi connection and return to the screen to select a Web service. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. The screen can be scrolled up and down by pressing the keys.
Sending Images to a Web Service With a Wi-Fi connection to a Web service established, a picture cannot be taken even if the camera’s shutter button is pressed. RAW images cannot be sent. When sending an image to a Web service other than CANON iMAGE GATEWAY, a send error message may not be displayed even if the image has not been sent to the Web service successfully. Such errors can be checked on the CANON iMAGE GATEWAY site; check the error content, then try sending the image again.
10 Advanced Wi-Fi Connection 107
Wi-Fi Function Operation Flowchart (Advanced Wi-Fi Connection) This section mainly describes how to connect via Wi-Fi using a Wi-Fi access point. When you connect to a Wi-Fi access point, you can use the following functions: q D l w Communicate with smartphone Remote control (EOS Utility) Print from Wi-Fi printer Send images to Web service Set up Set the camera’s Wi-Fi settings (p.12) Install Camera Connect on a smartphone (p.
Checking the Type of Access Point To start with, check if the access point supports WPS* that allows easy Wi-Fi connection between Wi-Fi devices. If you do not know if the access point you use is WPS-compatible, refer to the access point instruction manual or other documentation. * Wi-Fi Protected Setup When WPS is supported The following two Wi-Fi connection methods are available. Connection can be established easier with WPS (PBC mode).
Establishing a Wi-Fi Connection with WPS (PBC Mode) This is a Wi-Fi connection mode available when using an access point compatible with WPS. In pushbutton connection mode (PBC mode), the camera and the access point can be connected via Wi-Fi simply by pressing the WPS button on the access point. If multiple access points are active in the surrounding area, it may be more difficult to establish a Wi-Fi connection. In such a case, try using [WPS (PIN mode)] to establish a Wi-Fi connection.
Establishing a Wi-Fi Connection with WPS (PBC Mode) [Register a device for 3 Select connection]. Not displayed when a Web service is selected in step 2. Proceed to step 5. When [q] (Connect to smartphone) is selected, the screen on the left is displayed. If Camera Connect is already installed, select [Do not display] and press <0>. [Switch network]. 4 Select Displayed when [q], [D], or [l] is selected in step 2. 5 Select [Connect with WPS].
Establishing a Wi-Fi Connection with WPS (PBC Mode) [WPS (PBC mode)]. 6 Select Select [OK] and press <0> to go to the next screen. to the access point via 7 Connect Wi-Fi. Press the access point’s WPS button. For details about where the button is located and how long to press it, refer to the access point’s instruction manual. Select [OK] and press <0> to establish a Wi-Fi connection with the access point. When a Wi-Fi connection with the access point is established, the next screen is displayed.
Establishing a Wi-Fi Connection with WPS (PBC Mode) Specifying Settings for the Wi-Fi Function This section describes how to set the screens for the Wi-Fi function. Read the page that introduces the selected Wi-Fi function. Communicating with a Smartphone Step 7 on page 58 Operating Remotely Using EOS Utility Step 6 on page 79 Printing Images Using a Wi-Fi Printer Step 6 on page 85 Sending Images to a Web Service The settings for connecting to a Web service via Wi-Fi are now complete.
Establishing a Wi-Fi Connection with WPS (PIN Mode) This is a Wi-Fi connection mode available when using an access point compatible with WPS. In PIN code connection mode (PIN mode), an 8-digit identification number specified on the camera is set at the access point to establish a Wi-Fi connection. Even if there are multiple access points active in the surrounding area, a relatively reliable Wi-Fi connection can be established using this shared identification number. It may take approx.
Establishing a Wi-Fi Connection with WPS (PIN Mode) [Register a device for 3 Select connection]. Not displayed when a Web service is selected in step 2. Proceed to step 5. When [q] (Connect to smartphone) is selected, the screen on the left is displayed. If Camera Connect is already installed, select [Do not display] and press <0>. [Switch network]. 4 Select Displayed when [q], [D], or [l] is selected in step 2. 5 Select [Connect with WPS]. [WPS (PIN mode)].
Establishing a Wi-Fi Connection with WPS (PIN Mode) the PIN code at the 7 Specify access point. At the access point, specify the 8-digit PIN code displayed on the camera’s LCD monitor. For instructions on setting PIN codes at the access point, refer to the access point’s instruction manual. After the PIN code is specified, select [OK] and press <0>. to the access point. 8 Connect Select [OK] and press <0> to establish a Wi-Fi connection with the access point.
Establishing a Wi-Fi Connection with WPS (PIN Mode) Specifying Settings for the Wi-Fi Function This section describes how to set the screens for the Wi-Fi function. Read the page that introduces the selected Wi-Fi function. Communicating with a Smartphone Step 7 on page 58 Operating Remotely Using EOS Utility Step 6 on page 79 Printing Images Using a Wi-Fi Printer Step 6 on page 85 Sending Images to a Web Service The settings for connecting to a Web service via Wi-Fi are now complete.
Connecting to a Detected Network Manually via Wi-Fi Establish a Wi-Fi connection by selecting the SSID (or ESS-ID) of the access point for a Wi-Fi connection from a list of active access points nearby. Selecting the Access Point 1 Press the button. an item. 2 Select If the history (p.126) is displayed, switch the screen with the keys. If the [Wireless communication settings] screen is displayed, set the Wi-Fi settings (p.12).
Connecting to a Detected Network Manually via Wi-Fi [Switch network]. 4 Select Displayed when [q], [D], or [l] is selected in step 2. (1) (2) (3) an access point. 5 Select Press the keys to select the access point to connect to via Wi-Fi from the list of access points. (1) SSID (2) An icon is displayed if the access point is encrypted (3) Channel used [Refresh] and [Manual settings] Scroll down the screen in step 5 to display [Refresh] and [Manual settings].
Connecting to a Detected Network Manually via Wi-Fi Entering the Access Point Password Enter the password specified for the access point. For details on the specified password, refer to the access point’s instruction manual. The screens displayed in steps 6 to 7 below vary depending on the authentication and encryption specified for the access point. Go to step 8 when the [IP address set.] screen is displayed instead of the screens for steps 6 to 7. a key index.
Connecting to a Detected Network Manually via Wi-Fi Setting the IP Address [Auto setting]. 8 Select Select [OK] and press <0> to display the setting screen (p.122) for the Wi-Fi function selected in step 2. If [Auto setting] results in an error or if you want to specify the settings manually, see page 161. The IP address can only be set automatically in environments using DHCP servers, or access points or routers with DHCP server functionality, such that the IP addresses, etc.
Connecting to a Detected Network Manually via Wi-Fi Specifying Settings for the Wi-Fi Function This section describes how to set the screens for the Wi-Fi function. Read the page that introduces the selected Wi-Fi function. Communicating with a Smartphone Step 7 on page 58 Operating Remotely Using EOS Utility Step 6 on page 79 Printing Images Using a Wi-Fi Printer Step 6 on page 85 Sending Images to a Web Service The settings for connecting to a Web service via Wi-Fi are now complete.
Connecting to a Detected Network Manually via Wi-Fi Send To Screen A screen to select a destination may be displayed depending on the Web service you select in [Wi-Fi function]. To register destinations or to specify the settings, you must use a computer. For more information, refer to the EOS Utility Instruction Manual. When [m] (Email) or other service is selected on the [Upload to Web service] screen, the [Send to] screen may be displayed.
11 Reconnecting via Wi-Fi This section describes how to reconnect the camera to a device for which you have already established a Wi-Fi connection and how to register multiple connection settings.
Reconnecting via Wi-Fi Reconnect the camera via Wi-Fi to a device or service that you have connected to and registered connection settings for in the past. 1 Press the button. an item. 2 Select Select the item to connect to via Wi-Fi from the displayed history. If the item is not displayed, press the keys to switch the screen. If [Connection history] is set to [Hide], the history will not be displayed (p.159). After selecting the item, press <0>. 3 Operate the connected device.
Reconnecting via Wi-Fi D EOS Utility Start EOS Utility on the computer. If the computer’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. l Printer If the printer’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. Web Service The reconnection procedure is complete.
Connecting to a Bluetooth-connected Smartphone via Wi-Fi With a Bluetooth connection established between the camera and a smartphone, follow the steps below to reconnect to the smartphone via Wi-Fi. 1 Start Camera Connect on the smartphone. a Camera Connect 2 Select function. Select the Camera Connect function you want to use. For the Camera Connect functions, see page 28. Android A Wi-Fi connection will be automatically established.
Connecting to a Bluetooth-connected Smartphone via Wi-Fi iOS the SSID. 3 Check Check the camera’s SSID (network name) displayed on the smartphone. Smartphone’s screen (sample) the smartphone to 4 Operate establish a Wi-Fi connection. On the smartphone’s Wi-Fi function screen, select the SSID checked in step 3. Display the Camera Connect screen. When a Wi-Fi connection is established, the screen for the selected function will appear. “_Canon0A” is displayed at the end of the SSID.
Registering Multiple Connection Settings You can register up to 20 connection settings for the Wi-Fi function. 1 Press the button. an item. 2 Select When the screen on the left appears, press the keys to switch the screen. Select the item to newly connect to via Wi-Fi from the screen on the left, then press <0>. For [z] (Transfer imgs between cameras), see “Connecting to Another Camera via Wi-Fi” (p.61).
12 Checking and Operating Connection Settings This section describes how to change or delete the connection settings, clear the wireless communication function settings, etc.
Changing or Deleting Connection Settings Change or delete connection settings saved on the camera. To change or delete the connection settings, terminate the Wi-Fi connection first. 1 Press the button. an item. 2 Select When the screen on the left appears, press the keys to switch the screen. From the screen on the left, select the item for which to change or delete the connection settings, then press <0>. 3 Select [Edit device information]. a device.
Changing or Deleting Connection Settings or change the connection 5 Check settings. Select an item and press <0>, then change or delete the connection settings on the displayed screen. [Change device nickname] (p.158) You can change the nickname using the virtual keyboard (p.160). [Viewable imgs] (p.43) Displayed when [q] (Connect to smartphone) is selected. Settings will appear at the bottom of the screen. [Erase connection information] You can delete connection settings saved on the camera.
Clearing Wireless Communication Settings to Default All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent them from being exposed when you lend or give your camera to other people. 1 Select [Wireless communication settings]. Under the [51] tab, select [Wireless communication settings], then press <0>. [Clear settings]. 2 Select Select [Clear settings], then press <0>. [OK].
View Info Screen On the [View info] screen, you can check the error content and the MAC address. 1 Press the button. an item, then press the 2 Select button. The [View info] screen will appear. When an error has occurred, press <0> to display the error content. You can check the MAC address of the camera on this screen.
13 Troubleshooting Guide 137
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press <0> (p.135). Select [Error details] on the [Wi-Fi on] screen, then press <0>. Click the error code number’s page in the following chart to jump to the corresponding page. 11 (p.139) 12 (p.139) 21 (p.140) 22 (p.141) 23 (p.142) 61 (p.143) 63 (p.
Responding to Error Messages 11: Connection target not found In the case of [q], is Camera Connect running? Establish a connection using Camera Connect (p.58). In the case of [l], is the power of the printer on? Turn on the printer. In the case of [D], is EOS Utility running? Start EOS Utility and re-establish the connection (p.78).
Responding to Error Messages 21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the correct setting? If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera (p.161). What to check on the DHCP server Is the power of the DHCP server on? Turn on the DHCP server.
Responding to Error Messages 22: No response from DNS server What to check on the camera On the camera, does the DNS server’s IP address setting match the server’s actual address? Set the IP address to [Manual setting]. Then, on the camera, set the IP address that matches the address of the DNS server used (p.156, 161). What to check on the DNS server Is the power of the DNS server on? Turn on the DNS server.
Responding to Error Messages 23: Device with same IP address exists on selected network What to check on the camera Do the camera and another device connected via Wi-Fi to the same network have the same IP address? Change the camera’s IP address to avoid using the same address as another device on the network. Otherwise, change the IP address of the device that has a duplicate address.
Responding to Error Messages 61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible from the point of view of the camera (p.153). What to check on the camera Does the SSID set on the camera match that of the access point? Check the SSID at the access point, then set the same SSID on the camera (p.119).
Responding to Error Messages 63: Wireless LAN authentication failed Are the camera and the access point set to use the same authentication method? The camera supports the following authentication methods: [Open system], [Shared key], and [WPA/WPA2-PSK] (p.109). Are the camera and the access point set to use the same password for authentication? The setting is case-sensitive, so check upper- and lower-case characters. Make sure that the correct password for authentication is set on the camera (p.
Responding to Error Messages 65: Wireless LAN connection lost Are any obstacles blocking the line of sight between the camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible from the point of view of the camera (p.153). The Wi-Fi connection was lost for some reason, and the connection cannot be restored.
Responding to Error Messages 68: Cannot connect to wireless LAN terminal. Retry from the beginning. Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the specified period of time? Hold down the WPS button for the period of time specified in the access point’s instruction manual. Are you trying to establish a connection near the access point? Try establishing the connection when both devices are within reach of each other.
Responding to Error Messages 102: Could not send files Does the card in the camera to receive data have sufficient space? Check the card in the camera to receive data. Replace the card or make sufficient space available, then try sending the data again. Is the card in the camera to receive data locked? Check the card in the camera to receive data. Release the lock, then try sending the data again. Check if the folder number of the camera to receive data is 999 and the file number 9999.
Responding to Error Messages 105: Could not receive files. Card’s write protect switch is set to lock Is the card in the camera to receive data locked? Check the card in the camera to receive data. Release the lock, then try sending the data again. 106: Could not receive files. Folder and file number have reached maximum value Check if the folder number of the camera to receive data is 999 and the file number 9999. Folder or file names cannot be created automatically.
Responding to Error Messages 122: Connect to a computer, and correct the settings for the Web service with EOS software. Web service setting operation may have failed. Connect the camera and computer via Wi-Fi or with an interface cable (sold separately) and reconfigure Web service settings using EOS Utility (p.17). 123: Cannot log in to Web service. Connect to a computer and correct the settings with EOS software.
Responding to Error Messages 127: An error has occurred A problem other than error code number 121 to 126 occurred during the connection to the Web service. Try re-establishing the Wi-Fi connection to the Web service. 141: Printer is busy. Try connecting again. Is the printer performing a printing process? Try again to establish the Wi-Fi connection to the printer after the printing process is finished.
Troubleshooting Guide If a problem occurs with the camera, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact the nearest Canon Service Center. A device connected with an interface cable cannot be used. With a Wi-Fi connection established, you cannot use the camera by connecting it to Connect Station, a computer, or another device with an interface cable. Terminate the Wi-Fi connection before connecting the interface cable.
Troubleshooting Guide Cannot pair with a smartphone. A previously paired smartphone cannot be paired with the camera again if the camera’s registration is retained on the smartphone. In such a case, remove the camera’s registration retained in the Bluetooth settings on the smartphone and try pairing again (p.21).
Wireless Communication Function Notes If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible. In such a case, bring the camera and the smartphone closer together, then establish a Wi-Fi connection.
Wireless Communication Function Notes Using an Eye-Fi Card When [Wi-Fi] is set to [Enable], image transfer using an Eye-Fi card is disabled.
Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor the Wi-Fi transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Checking Network Settings Windows Open the Windows [Command Prompt], then type ipconfig/all and press the key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. Mac OS In Mac OS X, open the [Terminal] application, enter ifconfig -a, and press the key. The IP address assigned to the computer is indicated in the [en0] item next to [inet], in the format “***.***.***.***”.
14 Reference 157
[Wireless communication settings] Screen On the [Wireless communication settings] screen, you can change the wireless communication function settings. Press the button, select [Wireless communication settings] under the [51] tab, then press <0>. [Wi-Fi settings] See the next page.
[Wi-Fi settings] Screen [Wi-Fi] You can set whether to [Enable] or [Disable] the wireless communication function. When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable]. [NFC connection] (p.47) You can set whether to [Enable] or [Disable] NFC connection. [Password] Set to [None] to allow a Wi-Fi connection to be established without a password (except when connected to an access point via Wi-Fi).
Virtual Keyboard Operation Changing the entry area Press the button to toggle between the top and bottom entry areas. Moving the cursor Press the keys in the top area to move the cursor. Entering text In the bottom area, press the or keys to select a character, then press <0> to enter it. You can check how many characters you have entered and how many more can be entered by referring to [*/*] on the upper right of the screen.
Setting up the IP Address Manually Set up the IP address settings manually. The items displayed vary depending on the Wi-Fi function. 1 Select [Manual setting]. Select [OK] and press <0> to go to the next screen. the item to be set. 2 Select Select an item and press <0>. The number entry screen will appear. To use a gateway, select [Enable], select [Address], then press <0>. the desired values.
Setting up the IP Address Manually [OK]. 4 Select When you have completed setting the necessary items, select [OK] and press <0>. The setting screen for the Wi-Fi function will appear (p.122). If you are not sure what to enter, see “Checking Network Settings” (p.156), or ask the network administrator or another person knowledgeable about the network.
Wireless Communication Status Wireless communication status can be checked on the camera’s LCD monitor and lamp.
Wireless Communication Status Bluetooth function indicator Bluetooth function Connection status Other than [Disable] [Disable] LCD monitor Bluetooth connected Bluetooth not connected Bluetooth not connected Not displayed * Bluetooth is not connected with a Wi-Fi connection established.
Specifications 9Wi-Fi Standards compliance: IEEE 802.11b/g/n Transmission method: DS-SS modulation (IEEE 802.11b) OFDM modulation (IEEE 802.11g/n) Transmission range: Approx. 15 m / 49.2 ft.
Wireless Communication Function Precautions 9Countries and Regions Permitting Wireless Communication Function Use Use of wireless communication functions is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating wireless communication function regulations, visit the Canon website to check where use is allowed.
Trademarks Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. The Wi-Fi CERTIFIED logo and the Wi-Fi Protected Setup mark are trademarks of the Wi-Fi Alliance. WPS used on camera settings screens and in this manual stands for Wi-Fi Protected Setup. UPnP is a trademark of the UPnP Implementers Corporation.
Index A Access points................................109 Encryption ................................109 Android ...........................................15 Authentication ...............................109 B Bluetooth...........................19, 20, 163 Address ......................................31 Connecting .................................21 C Camera access point mode ..........123 Camera Connect...............15, 28, 164 CANON iMAGE GATEWAY ............
Index S Send images to smartphone .....33, 53 Send img shown .................35, 64, 97 Send range .......................38, 67, 100 Send selected .....................36, 65, 98 Sending all images on the card ........................40, 69, 102 Sending images ............33, 53, 64, 97 Sending images that match search conditions ..............41, 70, 104 Sending images to a Web service ...95 SSID......................26, 57, 78, 84, 118 Stealth functions ...........................109 Switch network....
CANON INC. 30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan Europe, Africa & Middle East CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands For your local Canon office, please refer to your warranty card or to www.canon-europe.com/Support The product and associated warranty are provided in European countries by Canon Europa N.V. CEL-SX1AA210 © CANON INC.
