Wireless Function User Manual

66
Connecting via WPS (PIN Mode)
4
Select [Connect with WPS].
 Select [Connect with WPS] and
press <0>.
5
Select [WPS (PIN mode)].
 Select [WPS (PIN mode)] and press
<0>.
 Select [OK] and press <0> to go to
the next screen.
6
Specify the PIN code at the
access point.
 At the access point, specify the 8-digit
PIN code displayed on the camera’s
LCD monitor.
 For instructions on setting PIN codes
at the access point, refer to the
access point’s instruction manual.
 After the PIN code is specified, select
[OK] and press <0>.
For [Camera access point mode] displayed in step 4, see page 74.