Wireless File Transmitter WFT-E6
Table Of Contents
- Cover
- Introduction
- Basic Network Settings
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating Remotely Using WFT Server
- Operating Remotely Using a Smartphone
- Linked Shooting
- Synchronizing the Camera Time Wirelessly
- Terminating the Connection and Reconnecting
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
94
Using the Transmitter with WFT Server
5
Select [Confirm settings].
The settings are displayed.
6
Check the settings.
Turn the <5> dial to display other
screens.
Write down the IP address and SSID.
The SSID is the same for all the
cameras.
After checking the settings, press the
<M> button to exit the
confirmation dialog.
Check settings on the master camera and all slave cameras in the
same way.
IP addresses assigned to cameras end in 1 - 11, as in 192.168.1.1 -
192.168.1.11.
For this reason, assign computer IP addresses that end in a number
higher than 11, as in 192.168.1.12.
IP Addresses Assigned to Computers