Wired LAN Instruction Manual
Table Of Contents
- EOS-1D X Mark II
- Introduction
- Basic Network Settings
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating Remotely Using WFT Server
- Operating Remotely Using a Smartphone
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
93
Responding to Error Messages
What to check on the proxy server
Is the power of the proxy server on?
X Turn on the proxy server.
Is the proxy server working correctly?
X Check the proxy server settings to make sure it is working correctly
as a proxy server.
X If applicable, ask your network administrator for the proxy server’s
address setting and port number, then enter them on the camera.
What to check on the network as a whole
Does your network include a router or similar device that
serves as a gateway?
X If applicable, ask your network administrator for the network
gateway address and enter it on the camera.
X Make sure that the gateway address setting is correctly entered on
all network devices, including the camera.