Wired LAN Instruction Manual
Table Of Contents
- EOS-1D X Mark II
- Introduction
- Basic Network Settings
- Transferring Images to an FTP Server
- Operating Remotely Using EOS Utility
- Operating Remotely Using WFT Server
- Operating Remotely Using a Smartphone
- Synchronizing the Camera Time
- Terminating the Connection and Reconnecting
- Checking and Operating Connection Settings
- Troubleshooting Guide
- Reference
45
Configuring WFT Server Connection Settings
4
Select [OK].
Select [OK] and press <0>. A
connection completion screen will
appear.
5
Select [OK].
Press <0> to return to the [Network
settings] screen.
The settings for connecting to WFT Server are now complete.
You can change the WFT account settings on the [Function settings]
screen (p.84). The port number setting can also be changed on the
[Function settings] screen. Note that there is normally no need to change
the port number (80).