Software Instructions EOS DIGITAL SOLUTION DISK Ver.3 for Macintosh

5-28
Setting the Parameters
7
Check the tone curve.
● Select the tone curve colors to be
displayed from the [Color Channel]
list box and check the colors.
● You cannot adjust the tone curve
at this point. Use the procedure in
“Adjusting the Color and
Brightness (Adjust Tone Curve)”
(➞3-22) to adjust the tone curve.
8
Click the [Apply to Camera] button.
\ The tone curve to be registered on the camera is set.
9
Click the [Close] button.
\ The [User-Defined Tone Curve] dialog box closes.
10
Select the sharpness and JPEG image quality.
● The [Intensity] and [Object] settings are applied to both JPEG and RAW images.
The [Fine Quality] and [Normal Quality] image quality settings for JPEG quality are
applied to JPEG images.
● The available [Intensity] settings are [0], [1], [2], [3], [4], and
[5]. Higher values give higher levels of edge sharpening.
● The available [Object] settings are [Fine], [Medium-Fine],
[Standard], [Medium-Rough], and [Rough]. If you select
[Rough], the specified sharpness level is applied to subjects
with a rough image pattern. If you select [Fine], the specified
sharpness level is applied to subjects with a fine image
pattern.
● In the [Fine Quality] setting, you can select a value of [6], [7],
[8], [9] or [10]. Higher values give a lower compression ratio
and higher image quality.
● In the [Normal Quality] setting, you can select a value of [1],
[2], [3], [4] or [5]. Higher values give a lower compression ratio
and higher image quality.