Software Instructions EOS DIGITAL SOLUTION DISK Ver.3 for Macintosh

3-40
Specifying the Preferences
● You can specify the settings shown below in the [RAW Image Processing
Settings] tab sheet.
The settings described here are those shown when [EOS-1D] is selected in the [Model
Name] list box.
5 Select [EOS-1D].
6 Clicking this checkbox applies the settings used when the shot was taken.
7 Select any of 6 ([0] to [5]) levels of sharpness.
8 Select any of 5 ([Fine], [Mid.Fine], [Standard], [Mid.Rough], or [Rough]) target
frequencies for sharpness adjustment.
9You should select this option when you want to perform the linear processing on an
image. If you select this option, the tone curve adjustment (➞3-22) cannot be performed.
Since the linear processing is performed on the tone curve adjustment when the image
is transferred to an application such as Photoshop 5.0 LE, there is little image
degradation as a result and you can make your own fine adjustments to the color
chroma.
10 Clicking this checkbox neutralizes false colors.
11 Select [8 bits per color channel] or [16 bits per color channel] as the download bit rate to
the Plug-In Module-compatible application.
12 Clicking this checkbox ensures that the RAW and JPEG images are transferred at the
same time when you transfer an image in the RAW+JPEG format. If you clear this
checkbox, only the RAW image is transferred.
● The buttons listed below are displayed in each of the tab sheets. They
function in the same way in each sheet.
13 Restores the default settings for all the parameters in the currently displayed tab sheet.
14 Discards all the settings, restores the parameters to their original values and ends the
procedure.
15 Applies the specified parameters, closes the [Preferences] dialog box and ends the
procedure.
When you select any camera other than [EOS-1D] in the [Model Name] list box, the
available settings for the respective camera model are displayed.