Service manual

II. TABLE OF CONTENTS
Part 1: MAINTENANCE
1. MAINTENANCE
1
-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service
Engineer
(1) Adjustment
(2) Periodic maintenance
(3) Periodic replacement parts
(4) Replacement consumables
(5) Replacement of the print head
1-2. Customer Maintenance
1
-3. Product Life
(1) Printer
(2) Print head
(3) Ink tank
1-4. Special Tools
1
-5. Serial Number Location
2. LIST OF ERROR DISPLAY / INDICATIONS
2
-1. Operator Call Errors
2
-2. Service Call Errors
2
-3. Warnings
2
-4. Troubleshooting by Symptom
3. REPAIR
3
-1. Notes on Service Part Replacement
3
-2. Special Notes on Repair Servicing
(1) Flexible cable and harness wiring, connection
(2) Notes on disassembly and re-assembly
3-3. Adjustment / Settings
(1) Paper feed motor adjustment
(2) Pump unit adjustment
(3) Grease application
(4) Waste ink counter setting
(5) User mode
(6) Service mode
3-4. Verification Items
(1) Service test print
(2) EEPROM information print
4. PRINTER TRANSPORTATION
Part 2: TECHNICAL REFERENCE
1. NEW TECHNOLOGIES
(1) Main difference from DS700
2. CLEANING MODE AND AMOUNT OF INK PURGED
3. PRINT MODE
3
-1. Resolution during Printing via Computer
3
-2. Resolution in Card Direct / Camera Direct / Print Beam Printing
4. FAQ (Problems Specific to the SELPHY DS810 and Corrective Actions
Part 3: APPENDIX
1. BLOCK DIAGRAM
2. CONNECTOR LOCATION AND PIN LAYOUT
2
-1. Logic Board Ass'y
2
-2. Panel Board Ass'y
2
-3. Card Board Unit
2
-4. Front I/F Unit
2
-5. Rear I/F Unit
3. SPECIFICATIONS