Service manual

3-3. Adjustment / Settings
As the following adjustments / settings (excluding user mode and service mode) for DS810 are the same as those for DS700,
see DS700 Service Manual for details as a reference.
For DS810, access cover gear phase adjustment and grease application on the access cover are not necessary.
(1) Paper feed motor adjustment
(2) Pump unit adjustment
(3) Grease application
(4) Waste ink counter setting
(5) User mode
*1: Selectable from among the following 15 languages in the user mode (through operation panel buttons with the LCD monitor):
LG = 01 Japanese
Function Procedures Remarks
Nozzle check pattern printing Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Available through the printer driver
utility functions as well
Print head cleaning Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Available through the printer driver
utility functions as well
Print head deep cleaning Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Available through the printer driver
utility functions as well
Print head alignment Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Available through the printer driver
utility functions as well
Print head alignment values
printing
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Language selection
*1
Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box -> each setting)
Paper feed roller cleaning Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Set several sheets of 4" x 6" sized paper
with the non-print side facing up.
Bottom plate cleaning Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box ->
Maintenance)
Set Canon genuine paper MP-101 4" x
6", GP-401 4" x 6", or GP-501 4" x 6"
in the auto sheet feeder.
LCD viewer contrast adjustment Use of operation panel buttons with
the LCD monitor
(Menu -> Tool box -> each setting -
> other setting)
Print head friction prevention Paper thickness lever: right side ->
left side
Print head replacement Press and hold the Stop / Reset
button for more than two seconds at
the ink tank replacement position ->
moves to the print head replacement
position